Abstract:In order to study the hydroforming simulation process of variable cross-section shaped tubular automobile longitudinal arm and the influence law of key factors on its forming quality, and to provide guidance for its engineering application. Firstly, the numerical simulation and experimental analysis of hydroforming are carried out on variable diameter tube with similar characteristics to the longitudinal arm hydroforming, and the correctness of the built finite element model and numerical simulation method is verified through experiments. Then, according to the structural characteristics of the automobile longitudinal arm parts, determine the longitudinal arm hydroforming process and the main molding parameters, and analyze the molding process by numerical simulation. According to the simulation results, the effects of hydroforming initial internal pressure, initial feeding, friction coefficient and shaping pressure on the wall thickness characteristics and shaping rules of the longitudinal arm are investigated, and the hydraulic expansion test of automobile longitudinal arm is carried out on the basis of the optimal loading path obtained. The results show that: in the case that the initial internal pressure does not reach the cracking pressure, the initial internal pressure and initial axial feeding has a greater impact on the wall thickness of the automobile longitudinal arm, reduce the friction coefficient can improve the material flow performance, improve the uniformity of the wall thickness of the parts, and appropriately increase the shaping pressure can improve the dimensional accuracy of the longitudinal arm molding and the molding quality. It is verified by experimental comparison that the whole process of automobile longitudinal arm forming simulation based on bending-hydraulic forming has high feasibility, and a relatively good loading path can be obtained to provide reference for practical engineering applications.

The Study of Loading Path Optimization for Tube Hydroforming Process

Effect of the Load Path on Formability of T-Shaped Tube Hydroforming

Predictive modeling of Loading paths for Hydroforming of bi-layered Y-shaped tubes

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints Connected with Square Steel Tubes

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Parameters Optimization of Tailor Welded Blank Forming Process

The Path-Engulfment Method for Topology Optimization of Structures

Preform cross-section shape optimization design for tube hydroforming with low pressure

Investigation of forming optimization of composite tubes based on liquid impact forming

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Mechanical Analysis and Optimal Control of Hydrogen Storage Vessels with Carbon Fiber Filament Wound Aluminum Liner

Effect of Internal Pressure Distribution on Thickness Uniformity of Hydroforming Y-shaped Tube

Approach Based on Response-Surface Method to Optimize Lining of Dies Used in 3D Free-Bending Forming Technology

Theoretical and Experimental Study on Load-Carrying Capacity of Combined Members Consisted of Inner and Sleeved Tubes

Effects of preform on thickness distribution of hydroformed Y-shaped tube

Effect of Strain State on the Surface Roughening for Hydroforming of Aluminum Alloy Tube Based on Cross-Scale Numerical Modeling

Influence of Process Parameters on Thinning Ratio and Fittability of Bellows Hydroforming

Study on comparison and optimization of section types of concrete-filled steel tube

Research on the hydroforming law of variable cross-section shaped tubular automobile longitudinal arm