Abstract:In the industrial automated production line, how to use the existing low-cost pneumatic equipment to obtain the best positioning effect has become a significant engineering problem. In this paper, a differential switching method is proposed in a pneumatic servo system consisting of four low-cost on-off valves for more precise control and lower prices. All valves are simultaneously open at the initial stage of each control period, and the differential closing time of the desired valves is calculated through the theoretical models. A sliding mode controller is applied with the proposed method, and the system stability is proven. The real-time control setup including three software layers is proposed to implement the algorithm. Several experiments are performed on a real-time embedded controller. Average 0.83% overshoot and 0.18 mm steady-state error are observed in the step response experiment. The highest frequency of sine wave that can be tracked is 1 Hz, and the average error is 1.68 mm. The maximum steady-state error is about 0.5 mm in the step response under payloads of 5.25 kg. All the simulation and experimental results prove the effectiveness of the control method.</p>

Pneumatic control system of superplastic forming equipment based on OPC communication technology

Design and Speed Control for Closed-loop Electro-hydraulic Proportional Servo Injection Machine System

Position Servo Control for Pneumatic Actuator with Fuzzy PID

The Application of Intelligence PID Control in Pneumatic System of Superfinishing - Machine

Design of High Pressure Reduction with Expander Pneumatic System' s Controller

High Performance Pressure Control for the Hydraulic Press Based on the Soft Relief Fuzzy Pid Controller

Utrahigh Pressure Control Method Based on Fuzzy PID

Pneumatic Position Servo Embedded Controller and Control Strategy

Predictive PID Control of the Pressure Reduction by Expander in High-pressure Pneumatic System

Automatic Control System Design and Realization of Latex Polymerization Process

Hybrid fuzzy PID control of hydraulic robot

A simulating study of pneumatic position servo system with PID control

Blank Holder Force Control of Hydraulic Cushion with Soft Relief Fuzzy PID Controller

Predictive Function Control of Hydraulic Robot

Packing Pressure Control in a High-accuracy Plastic Injection Molding Machine Based on CMAC and PID Compound Controller

Fuzzy-PID Control of High Pressure Supercritical Fluid Extraction Equipment

APPLICATION OF ADAPTIVE INTERACTION PID CONTROLLER IN HYDRAULIC SERVO SYSTEM

Expert-PID Synchronization Control of Thrust Hydraulic System

A Real-Time Realization Method for the Pneumatic Positioning System of the Industrial Automated Production Line Using Low-Cost On-Off Valves

Application of PLC in Pneumatic Measurement Control System

The Design of the Injection Molding Machine Control System Based on PLC Controller