Abstract:An independent metering valve control hydraulic system (IMVCHS) adopts two independent valves to separately control the meter-in and meter-out orifices. This structure increases the degree of freedom of the control, and improves its flexibility and energy-saving performance. In this study, an IMVCHS was established that applies a control system developed to research the pressure and flow compound control performance. A two-level fuzzy control algorithm based on the calculated flow rate feedback from the spool displacement was proposed to realize high precision flow control, and the two-level fuzzy control algorithm based on the pressure feedback was also adopted to enhance the pressure performance under a dynamic load. A simulation model was established, and its key parameters identified experimentally using the simulated load of a hydraulic bridge circuit. The experimental results show that the proposed flow controller has higher control accuracy with an error of less than 2%, and the flow adjustment time for 40 L/min step control is 320 ms. The pressure controller with a two-level closed-loop fuzzy algorithm can significantly improve these pressure dynamic and static performances, and achieve a step response time of less than 180 ms. Combining the pressure and flow controllers, the pressure and flow compound control of the IMVCHS is realized, and the capacity for coping with load fluctuations is also identified, with compound adjustment times of generally less than 200 ms, and occasionally less than 100 ms. This control system therefore achieves a good performance for pressure and flow compound control, and is able to widen the application of independent metering control technology.

Blank Holder Force Control of Hydraulic Cushion with Soft Relief Fuzzy PID Controller

High Performance Pressure Control for the Hydraulic Press Based on the Soft Relief Fuzzy Pid Controller

Fuzzy control of injection pressure of injection molding machines based on a nonlinear function

Research on control characteristic and compensation of water hydraulic proportional pressure relief valve

Utrahigh Pressure Control Method Based on Fuzzy PID

Position Servo Control for Pneumatic Actuator with Fuzzy PID

Pressure Control of the Proportional Directional Control Valve Test Rig Based on the Fuzzy Proportional-Integral-Double-Integral Controller

Modelling and Experimental Verification of Pressure Relief Synchronous Control for Small Trapped Fluid Volumes.

A New Fuzzy Self-Tuning Method for Controlling Packing Pressure of a High-Accuracy Injection Molding Machine

Expert-PID Synchronization Control of Thrust Hydraulic System

Packing Pressure Control for Energy-Saving Servo Injection Molding Based on Fuzzy-PID Controller

Experiment on Proportional Pressure Control of Water Hydraulic System for Water-assisted Injection Molding

Researches on stiction compensation in process control values

Hybrid fuzzy PID control of hydraulic robot

Modeling of fuzzy control in sheet deep drawing

Analysis of Pressure and Flow Compound Control Characteristics of an Independent Metering Hydraulic System Based on a Two-Level Fuzzy Controller

Variable Blank Holder Force Optimization Based on PID Closed-loop Control

Adaptive Fuzzy PID Control for Switched Reluctance Motor Direct Drive Servo Hydraulic Press

Fuzzy Self-adaptive PID Control in Anti-surge Base on Hollsys System

Research on dynamic performance of independent metering valve-cylinder system based on double pressure compound control

RESEARCH ON COMPENSATION FOR VARIABLE DEAD-ZONE CHARACTERISTIC OF ELECTRO-HYDRAULIC PROPORTIONAL DIRECTION VALVE IN POSITION CONTROL