Abstract:The possible fracture process of interior texture and its reinforcing mechanism to properties. Polyacrylonitrile (PAN)‐based precursor fibers with different mechanical properties prepared by wet‐spinning and its correlation with microstructure was researched, the primary structural factors that affecting its properties were analyzed. The tensile strength and modulus of precursor fibers increased from 4.63 cN/dtex to 9.16 cN/dtex and 99.09 cN/dtex to 168.92 cN/dtex, respectively, with the increase in crystallinity from 69.29% to 87.84% and orientation degree increased from 83.95% to 93.81%, high performance precursor fibers could be achieved by decrease in the crystallite size and interlayer spacing, these aggregation structure plays a decisive role to the mechanical properties of fibers. The integrality of aggregation structure and properties could reflected by boiling water shrinkage behavior and glass transition temperature from the side. The fracture morphology of fibers with different properties were studied by scanning electron microscope (SEM) and three fracture characteristics were observed, PF1 and PF3 presented the radial extended fracture without microfibril pull out, radial cluster fracture with the pull out of microfibril for PF2, PF4–PF6, together with the axial splitting pattern in PF6, which was revealed by microfibrils/fibrils in longitudinal and transverse combined with solution etching. Precursor fibers with less voids, without serious skin‐core, continuous arrangement, tightly stacked, well‐developed and complete oriented microfibrils/fibrils, exhibited excellent mechanical properties. Possible fracture process was given from the perspective of aggregation structure and microfibrils/fibrils, which become dominant factors determining properties of precursor fibers. Improve the performance could be achieved by regulating surface structure and cross‐sectional shape. As one of the main structural factors that determining properties, by reducing diameter could minimize the numbers and sizes of defects.

Microstructure difference on skin and core of domestic PAN-based carbon fibers characterized by Raman spectroscopy

Surface Characteristics of Different Cross-Section Carbon Fibers and Its Effect on Interfacial Adhesion Properties of Composite

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers

A comparative analysis of polyacrylonitrile-based carbon fibers: (I) Microstructures

Comprehensive research on the correlation between microstructure and mechanical properties of polyacrylonitrile‐based precursor fibers prepared by wet‐spinning

Heterogeneous microstructure of γ-irradiated pre-oxidized PAN fiber revealed by microfocus SR-SAXS reconstruction and molecular simulation

Microstructural Evolution during Dry-Jet Wet Spinning Postprocessing from Coagulation Bath Fiber to High-Performance Polyacrylonitrile Precursor Fiber

Effect of the polyacrylonitrile mass fraction on the structure of coaxial polyacrylonitrile/mesophase pitch composite fibers

Effect of Net-shaped and Skin-core Structure on the Evolution of Making High Performance Carbon Fibers

Study on Raman multi-peak fitting and structure quantitative analysis of PAN-based carbon fibers

Effect of Coagulation Conditions on the Radial Moduli of Polyacrylonitrile Nascent Fibers

Effects of carbonization temperature on structure and mechanical strength of electrospun carbon nanofibrous mats

Skin-core structure in mesophase pitch-based carbon fibers: causes and prevention

A comparative analysis of polyacrylonitrile-based carbon fibers: (II) Relationship between the microstructures and properties

Advances in insight of radial heterogeneous microstructure and its relevance to mechanical properties of PAN‐based carbon fibers

Molecular Modeling of the Microstructure Evolution during the Carbonization of PAN-Based Carbon Fibers

New Insights into Orientation Differences Between Skin and Core Regions of Polyacrylonitrile Fibers During Pre-Stabilization with the Stretching Process

Plastic deformation of the microfibrils in wet polyacrylonitrile fibers induced by the stretching field

Effects of needle-punched felt structure on the mechanical properties of carbon/carbon composites

The micro-void structure transformation and properties assessment of polyacrylonitrile fibers irradiated by electron-beam as carbon fiber precursor