Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

Pipeline transportation characteristics of filling paste-like slurry pipeline in deep mine

Pipeline Transport Performance of Paste Backfill Slurry in Long-Distance Underground Backfilling: A Review

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Numerical Study of Resistance Loss and Erosive Wear during Pipe Transport of Paste Slurry

Method for calculating pressure losses in the pipelines of slurry shield tunneling based on coupled simulation of computational fluid dynamics and discrete element method

Research on key parameters of pipeline transportation of waste rock treatment in underground residual space

Numerical simulation of pressure profile of mining backfill fly-ash slurry in an L-shaped pipe using a validated Herschel-Bulkley model

Study on the suspending mechanism of gangue particle in coal-based solid waste slurry

Investigation into the flow characteristics of slurry shield pipeline system under sandy pebble stratum: Model test and CFD-DEM simulation

Numerical simulation of solid liquid two phase flow featuring combination of drainage and fast dredging in mine emergency

Numerical Study of Gangue Slurry Deposition Behavior in Pipelines Considering Viscosity Change

Study of the hydraulic transport of non-spherical particles in a pipeline based on the CFD-DEM

Analysis of transport properties with varying parameters of slurry in horizontal pipeline using ANSYS fluent

Study on hydrodynamic diffusion law of the swelling particle slurry in karst pipeline

Hydrodynamic simulation of multi-sized high concentration slurry transport in pipelines

The Mechanism of Viscosity-Enhancing Admixture in Backfill Slurry and the Evolution of Its Rheological Properties

STUDY OF LIQUID SLUG DEVELOPMENT CHARACTERISTIC IN HILLY TERRAIN PIPELINE UNDER MULTIPHASE SLUG FLOW

Dynamic fluid flow model for phosphate slurry pipeline: OCP main pipeline as case study

New Model and Finite Element Analysis of the Anti-Extrusion Strength of Backfill Drilling Pipelines

Study on Optimization Design of Coal Filling Mining Pipeline Parameters