Abstract:<p>Aluminum matrix composites are attractive in aerospace and automobile industry due to its low density, high strength and high corrosion resistance. Additive manufacturing methods such as selective laser melting enables fabrication of such composites with a complex geometry, and processing of novel, customized, tailored hybrid materials with unique hierarchical microstructures across multiple length scales. However, the microstructure evolution, wear resistance, frictional behavior under different fabrication and operation conditions of such composites still need to be explored. This study aims to fill the research gap in microstructure evolution and wear characterization of SLM-produced CNTs reinforced aluminum matrix nanocomposites. The surface characteristics, density, wear groove morphology, and surface damages in wear tests were examined. It was determined with SEM/EDS that the major phases of SLM-processed CNTs/Al-based nanocomposites were Al9Si and Si. These phases formed during the SLM process within the composites changed their wear behavior drastically. The wear surfaces were undergoing severe plastic deformation and progressive pitting. The wear rate of CNTs/AlSi10Mg nanocomposites specimens is about 33% lower than that of AlSi10Mg specimens. The higher wear resistance of the CNTs/AlSi10Mg nanocomposites specimens with shallow and narrow wear groove is attributed to the CNTs reinforcement induced higher surface hardness and also the unique hierarchical microstructure of the nanocomposites. The results showed that SLM-produced CNTs reinforced aluminum matrix nanocomposites have good potentials to be an alternative to pure AlSi10Mg counterparts in terms of hardness, strength, friction and wear behavior.</p>

Microstructure and wear properties of nanocomposite Al-Pb-Cu alloy cold-rolled onto steel matrix

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

Microstructure and wear characterization of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites manufactured using selective laser melting

Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites

Microstructure and Friction-wear Properties of Laser Clad Cu-base Composite Coating on Al Alloy Surface

Enhanced Mechanical and Electrical Properties of CuCrZr-WC Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering

Study on friction and wear behavior of SiCp/AZ91D nanocomposites

Microstructure and Wear Behaviour of Ceramic Particles Strengthening Nial Based Composite

Microstructure, Microhardness and Tribological Properties of Bronze-Steel Bimetallic Composite Produced by Vacuum Diffusion Welding

Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting

Effect of nanostructured Cu on microstructure, microhardness and wear behavior of Cu-xGnP composites developed using mechanical alloying

Evolution of Microstructure and Mechanical Properties of CNTs/Al-Mg Composites Prepared by Powder Metallurgy

Microstructure, mechanical properties and tribological behaviors of TiAlN-Ag composite coatings by pulsed magnetron sputtering method

Interface microstructure and abrasive wear properties of WC-iron matrix composites with Ni, Mo, Fe added to the preforms

Influence of adding Cu element on properties of Al/Al2O3 composite materials

Study on Microstructure and Properties of Cu-Zr Alloy Prepared by Mechanical Alloying

Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites

Preparation of Gradient Nanostructured Cu–Al Alloy Matrix and Evolution Microstructure and Properties

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Study on Mechanical Properties and Microstructure of Cu20Fe80 Alloy Using the Mechanical Alloying