Abstract:Abstract 2A12 aluminum alloy had the advantages of light weight and high strength. It could be used to manufacture the skin of the hypersonic aircraft. Due to the thermal deformation of fuselage and wing under long-term thermal and mechanical load, the accuracy of flight control was reduced. The shape memory effect of NiTi shape memory alloy (SMA) could be used to reduce the thermal deformation by realizing the laser welding of NiTi SMA and 2A12 aluminum alloy. According to previous studies on laser welding of NiTi SMA and TC4, the tendency to crack for the welded joints could be reduced by placing the laser beam on the side of TC4. Therefore, TC4 wire was used as the filling material. As the TC4 wire was constantly sent into the molten pool to absorb laser energy, the melting amount of NiTi SMA and 2A12 aluminum alloy were reduced. It was beneficial to reduce the formation of brittle intermetallic compounds. There were mainly the fusion zone (FZ), NiTi SMA/FZ interface, and the 2A12 aluminum alloy/FZ interface in the welded joints. With the increase of laser power, the growing distance of Ti 2 Ni phase also increased. In addition, the Ti-Al intermetallic compounds and the fracture load of joints firstly increased and then decreased. When the laser power was high, Ni-Al intermetallic compounds increased. This caused the decrease of fracture load of welded joints. Besides, pores caused by the burning of elements in the FZ would also weaken the fracture load of welded joints. When the laser power was 2.4 kW, more Ti-Al intermetallic compounds appeared at the interface and the maximum fracture load of welded joint was 211 N mm −1 . The fracture mode was intergranular brittle fracture. The heat affected zone (HAZ) with optimal mechanical properties basically retained the shape memory effect of NiTi SMA.

Microstructures and Properties of Laser Spot-Welded Joint of Superelastic NiTi Alloy Wire

The Influence of Laser Welding Parameters on the Microstructure and Mechanical Property of the As-Jointed NiTi Alloy Wires

Microstructure and Mechanical Properties of Micro Laser Welding NiTiNb/Ti6Al4V Dissimilar Alloys Lap Joints with Nickel Interlayer

Study on interface and mechanical property of laser welding of NiTi shape memory alloy and 2A12 aluminum alloy joint with a TC4 wire

Laser Welding of Niti Shape Memory Alloy Wires and Tubes for Multi-Functional Design Applications

Microstructure and Tensile Properties of Laser Beam Welded Ti–22Al–27Nb Alloys

Investigation of Welding Crack in Micro Laser Welded NiTiNb Shape Memory Alloy and Ti6Al4V Alloy Dissimilar Metals Joints

Microstructure, Variant Selection, and Mechanical Properties of Laser-Welded Ti-4Al-2V Joints

Influence of Laser Power on Microstructure and Mechanical Properties of Laser Welded-Brazed Mg to Ni Coated Ti Alloys

Study on laser welding of a Ti-22Al-25Nb alloy: Microstructural evolution and high temperature brittle behavior

Effect of Laser Welding Parameters on the Transformation Temperature of Tini Alloy

Dissimilar Laser Welding of a NiTi Shape Memory Alloy to Ti2AlNb

Ultrasonic Spot Welded NiTi Joints Using an Aluminum Interlayer: Microstructure and Mechanical Behavior

Enhancing microstructural and mechanical characteristics of laser welded NiTi SMA/304 SS lap joints with medium and high entropy alloy fillers

Microstructure and High-Temperature Tensile Properties of Ti3Al Alloys Laser Welding Joint

The Microstructure and Mechanical Properties of Dual-Spot Laser Welded-Brazed Ti/Al Butt Joints with Different Groove Shapes

Microstructural Characteristics and Mechanical Properties in Laser Beam Welds of Ti6al4v Alloy

Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys

Microstructure and Mechanical Properties of Laser Welded Lap Joints of Ti-6Al-4V Alloy

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Mechanical Properties of Additive Laser-Welded NiTi Alloy