Abstract:The mechanical behaviors of composite rock masses containing a complex interface widely distributed in nature are significantly different from those of monolithic rock masses. The objective of this study is to perform a series of uniaxial compression tests to study the influence of sawtooth interface parameters on the fracture behavior of rock-like composite specimens. Meantimes, the acoustic emission (AE) and digital image correlation (DIC) technique were used to classify damage stages and record strain field evolution, respectively. The results of this study demonstrate that stress-strain curves of composite rock-like specimens with different sawtooth interfaces display characteristics of plastic failure, friction failure characteristics and two different brittle failure characteristics in the post-peak phase. The peak strength of the specimen first decreases and then increases as the inclination of the interface increases, achieving the maximum value of 28.29 MPa at the inclined interface of 90°. The strain concentration zone is mainly generated and expanded around the interface. The parameters of the sawtooth have a significant influence on the type and location of cracks developed along the interface. In addition, there is a strong relationship between the mode of failure of the specimen and the strength of the rock layer and the inclination of the interface. According to the relative positional relationship between the coalescence path of the specimen and the interface, the failure modes of the specimen are classified as single weak rock layer failure (S-AB-0, S-AB-15), oblique failure through rock layer interface (S-AB-30, S-AB-45), slip failure along the interface (S-AB-60, S-AB-75) and axisymmetric failure along the interface (S-AB-90). This result is of great importance for a thorough understanding of the crack coalescence mechanism and strain field evolution of rock-like composite specimens.

In-situ SEM Observation of Crack Propagation along Explosive Clad Interface

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

In situ SEM study on tensile fractured behavior of Al/steel laser welding-brazing interface

In Situ Observation on Interfacial Damages of 304L/533B Explosive Welded Composite Steel Sheet under Tensile Loading

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

In-Situ Straining Observation On Crack Initiation And Growth In An Intermetallic Al67mn8ti25 Alloy

Fatigue Crack Propagation along Explosive Bonded Al/LY12 Interface

Interface Strength and Structure of Explosive Welding Sainless Steel-Aluminum Clad

In-situ observation of crack propagation through the nucleation of nanoscale voids in ultra-thin, freestanding Ag films

Cracking in a Fe–25Mn–3Si–3Al Steel

Interfacial investigations on the microstructure evolution and thermomechanical behavior of explosive welded CLAM/316L composite

In Situ SEM Investigation of Tensile Fracture Process of Fe-25Cr-35Ni Based Superalloy

CRACK PROPAGATION ALONG THE INTERFACE OF EX-PLOSIVE BONDED 1cr18ni9ti/20g PLATE

In Situ SEM Observations of Fracture Behavior of Laser Welded–Brazed Al/Steel Dissimilar Joint

Interface and grain-boundary amorphization in the Al/Fe bimetallic system during pulsed-magnetic-driven impact

An Experimental Investigation into Ductile-Brittle Transition of Pure Aluminum Sheet Constrained by Double Interface

In-situ Observation of Microcrack Initiation and Damage Nucleation Modes on the HAZ of Laser-Welded DP1180 Joint

Microstructure Analysis of the Explosive Cladding Interface of Nb/304L

In-situ investigation on tensile properties of a novel Ti/Al composite sheet

Strain field evolution and crack coalescence mechanism of composite strength rock-like specimens with sawtooth interface

In-Situ Sem Observation on Fracture Behavior of Austempered Silicon Alloyed Steel