Abstract:This study focuses on understanding the crucial phenomenon of deposition stress during the splat formation of plasma-sprayed droplets, which is essential for comprehending coating stress in applications such as plasma spraying. A novel three-dimensional coupled fluid–solid and thermo-mechanical model was developed, which employed the volume of fluid method and finite element method. This model was applied to simulate the formation of deposition stress in molybdenum droplets during plasma spraying onto a stainless steel substrate with laser-textured groove patterns. It successfully replicated various stages of the splat formation process, including impacting, spreading, cooling, and solidification, which captured the evolution of temperature, strain, and stress in the splat and groove walls. The accuracy of the model was validated through X-ray diffraction measurements of splat deposition stress on the planar substrate surface . The simulation results revealed that deposition stress was induced during the simultaneous spreading and solidification of the droplet. This stress was attributed to quenching and solidification contraction, which resulted in tensile stress in the splat, with higher stress at the bonding interface edges. By contrast, the groove walls experienced compressive stress, which peaked in the central groove region. The mean isotropic stress and von Mises stress of the splat were quantified as 176 and 141 MPa, respectively. In-situ curvature tests demonstrated that stress relaxation, which was triggered by splat deposition stress, resulted in a 24.6% reduction in cracking, yielding, and slipping stresses. In addition, a refined theoretical equation for splat deposition stress was proposed, with correction coefficients of 0.119 determined from simulations and experiments. The developed simulation model offers reliable insights into the state of splat deposition stress, which provides valuable information for optimizing plasma-spray processes and enhances our understanding of coating stress in such applications.

Prediction of Surface Residual Stress on High Velocity Arc Sprayed Coatings

PREDICTION AND CONTROL OF RESIDUAL STRESSES IN THERMAL SPRAYED COATINGS

Underlying mechanisms of the stress generation in surface coatings

Residual Stress in Thermal Spray Coatings Measured by Curvature Based on 3d Digital Image Correlation Technique

Modeling of the residual stresses in plasma-spraying functionally graded ZrO2/NiCoCrAlY coatings using finite element method

Effect of Thickness on the Residual Stress Profile of an Aluminum Cold Spray Coating by Finite Element Analysis

Residual Stress Analysis of Cold Spray Coatings Sprayed at Angles Using Through-thickness Neutron Diffraction Measurement

Dynamic Modeling of Micro- and Nano-Sized Particles Impinging on the Substrate During Suspension Plasma Spraying

Dynamic Numerical Simulation of Curved Surface Coating Trajectory Based on STL Slicing Algorithm

Analysis on Deposition Process and Residual Stress in Plasma Spraying

An analytical model for predicting thermal residual stresses in multilayer coating systems

Process Optimization and Residual Stress Measurement for Arc Spraying Rapid Tooling

The Surface Cracking Behavior in Air Plasma Sprayed Thermal Barrier Coating System Incorporating Interface Roughness Effect

A method for predicting critical load evaluating adhesion of coatings in scratch testing

On the Surface and System Performance of Thermally Sprayed Carbide Coatings Produced under Controlled Residual Stresses

Splat deposition stress formation mechanism of droplets impacting onto texture

Prediction of three-dimensional residual stresses in the multilayer coating-based systems with cylindrical geometry

Prediction of the Adhesion Strength of Coating in Plasma Spray Deposition

Analytical model for predicting residual stresses in abrasive waterjet peening

Prediction of Surface Residual Stress after End Milling Based on Cutting Force and Temperature

Investigation of Structural Integrity and Life Time Prediction of the Thermal Sprayed Alloy Coating for Remanufacturing