Research And Prospect On Internal Thermal Spraying Techniques
Wang Haidou,He Pengfei,Chen Shuying,Ma Guozheng,Liu Ming,Wang Haijun,Xu Binshi
DOI: https://doi.org/10.11933/j.issn.1007-9289.20180723001
2018-01-01
China surface engineering
Abstract:There are numerous critical inner bore parts in the industrial fields of mechanical manufacture, petrochemical, aeronautics and astronautics, and ferrous metallurgy, such as cylinder barrel of engine, gas turbine housing, cylinder in hydraulic mechanism and different types of pumping lines. These parts are always operating at harsh environment, like extreme temperature, corrosion medium, high load, etc., which easily causes severe failure of wear and corrosion. Internal thermal-spray technique is an important process for depositing coatings on inner surface of parts, which can strengthen the parts or remanufacture those scrapped components. This paper first introduces four typical internal thermal-spray techniques, including internal diameter-plasma spraying, plasma transferred wire arc, internal diameter-high velocity oxygen/air flame and internal diameter-wire arc spraying, from the aspects of technical principle, operation mode, development process and industrial application. On this basis, pros and cons of each technique are compared comprehensively, including process cost, materials selection and coatings performance. Then, features of those techniques are proposed from the perspective of interface bonding, control of porosity and thickness of the coating, and regulation of residual stress. The corresponding technical difficulties are summarized containing local accumulation of thermal and dust, and stress cracking of the coating. Finally, prospects for the development of the technology are discussed consisting of micro-forming mechanism of coatings, increasing the bonding strength between the coating and the substrate, and developing various composite surface engineering techniques.