Abstract:In this study, propylamine and ethylenediamine intercalated α-ZrP nanocomposites (denoted by P-α-ZrP and E-α-ZrP, respectively) were synthesized. The effects of propylamine and ethylenediamine intercalated α-ZrP nanocomposites and their reinforcements on the corrosion resistance and mechanical properties of Ni-B coatings were investigated and compared. The morphology and structure of the three composites were characterized using transmission electron microscopy, atomic force microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, infrared spectroscopy, thermogravimetric analysis, and particle size analysis. Both propylamine and ethylenediamine intercalation increase the layer spacing of α-ZrP, but do not change the lamellar structure of α-ZrP. The EIS test results show that both Ni-B/P-α-ZrP and Ni-B/E-α-ZrP composite coatings have significantly lower corrosion rates than Ni-B and Ni-B/α-ZrP composite coatings. Compared to Ni-B/α-ZrP, the corrosion rates are reduced by 32 % and 76 % respectively. The R ct values for Ni-B/P-α-ZrP and Ni-B/E-α-ZrP composite coatings are also distinctly higher than Ni-B/α-ZrP, with Ni-B/E-α-ZrP having the highest values. In addition, Ni-B/P-α-ZrP and Ni-B/E-α-ZrP composite coatings are both harder than Ni-B/α-ZrP and have lower average coefficients of friction and wear rates than Ni-B/α-aZrP. Among them, the Ni-B/E-α-ZrP composite coating has the highest microhardness (1163.64 ± 21.20 HV) and the best wear resistance. The wear rate is reduced by 87 % and 65 % compared to Ni-B and Ni-B/α-ZrP composite coatings respectively. In conclusion, both P-α-ZrP and E-α-ZrP are better than α-ZrP in terms of enhancement, with E-α-ZrP being the best.

Effect of Nano-Al2O3 on Corrosion Resistance of Ni-P Composite Coating by Electro-brush Plating

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Wear resistance of Ni/nano-Al2O3 composite coatings by brush electroplating

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Technology for Ni-Al2O3 Composite Coating and Its Properties

Effect of nano-Al 2 O 3 particle addition on Co–P–xAl 2 O 3 nanocomposite plating electroplated on X65 steel

Strengthening effect of α-ZrP nanosheet inclusions on corrosion resistance and wear resistance of Ni P deposits

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

Electrochemical behavior and electro-crystallization mechanism of Cu-Ni/Nano-Al 2 O 3 coating with a deposition current density dependence

Effects of Surface Modification on the Electrode Behavior of Ball-Milled La2Mg17 + 200 Wt% Ni Composite in Alkaline Solution

Study on mechanical and corrosion resistance of Ni-W-P composite coating reinforced by cationic cubic boron nitride

Microstructure of Nanometer-sized Al2O3 Composite Coating Prepared by Electroless Plating

Effect of Pre-Oxidation on the Electrochemical Corrosion Behavior of Ni-based Coating Reinforced by Ceramic Particles

Study on Ni-P-nanoTiN Electroless Composite Coating

Enhancement of Corrosion and Wear Resistance of Ni-P Coatings Stems from the Synergistic Effects of Cr3C2 and Heat Treatment

Effect of Nanodiamond Content in the Plating Solution on the Corrosion Resistance of Nickel–Nanodiamond Composite Coatings Prepared on Annealed 45 Carbon Steel

Effect of Mg on Al-Mg Alloy and Electroless Ni-P Codeposition of nano-Al2O3: Mechanical, Wear, and Corrosion Resistance Properties

Investigating the Microstructure and Anti-corrosion Behavior of the Electroless Ni-P-Y2O3 Composite Coatings

Corrosion and wear resistance behaviors of electroless Ni–Cu–P–TiN composite coating

Effects of propylamine and ethylenediamine intercalation of α-ZrP on the corrosion resistance and tribological properties of electroless Ni-B coatings