Abstract:In recent years, with the rapid development of tiny electronic components. At present, commonly used optical inspection technology and electron microscope inspection technology find it difficult to meet the dimensional inspection requirements of key components of highly integrated integrated circuits. Based on computer micro-vision technology, the coupling of measuring platform displacement to the development of miniature electronic components is of great significance for the analysis and design of precision platforms. This paper analyzes the influence of the three factors of material, software and environment on the accuracy positioning of the measurement system. The analysis shows that the characteristics of the imaging system itself and the image noise it brings are the main factors that affect the measurement accuracy. In this paper, a technique for blindly detecting the position of the scanner based on computer vision is proposed. This article uses a CCD optical camera to capture the orbital motion of the electronic pen, and uses video image processing algorithms, computer vision and position to capture the position of the light on the screen. With the support of specific software, this article creates a new interactive whiteboard system. Any large screen can be turned into a large touch screen with electronic writing surface and touch function. The device does not require a specific additional screen to operate, and the cost is lower. In this paper, the stereo microscope has a narrow field of view, small depth of field and many non-linear factors. Based on the analysis of existing camera models, a binocular microscope imaging model based on a linear camera is established. On this basis, through the experimental analysis of the feasibility of the existing camera calibration method in the binocular microsystem, the calibration method of the camera's main parameters is proposed. Experiments show that the resolution value of the peak value of the evaluation curve in this paper is 18 times the focus resolution value, while the commonly used algorithm for evaluating the peak value of the curve is only 14 times. Compared with the latter, the discrimination of the edge gradient Laplacian used in this paper is more obvious than the former.

Angle Error Measurement of Square Indexing Fixture Based on Machine Vision

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Research on high-speed and non-contact angle detection based on laser measurement

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Eccentricity Parameter Identification of Angle Sensors for Articulated Arm CMMs

A New Optical Angle Measurement and Compensation

Measurement Error Analysis and Accuracy Enhancement of 2D Vision System for Robotic Drilling

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

Vision measurement system for position-dependent geometric error calibration of five-axis machine tools

Method of Binocular Rotation Angle Measurement Based on Machine Vision

An angle measurement system for bending machine based on binocular active vision

Calibration of Circular Division Artifacts Using a Self-Developed Angle Comparator

Optimization Scheme of Measuring Accuracy of Bearing Seat Size Based on Machine Vision

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Calibration Method for Angle Measuring Accuracy of Measuring Angle Device with CCD

Calibration of an Indexing Table Using A High Precision Angle Comparator

A Visual-Based Angle Measurement Method Using the Rotating Spot Images: Mathematic Modeling and Experiment Validation

Two-dimension automatic tracking vision autocollimator system

Method Of Rotation Angle Measurement In Machine Vision Based On Calibration Pattern With Spot Array

A Position and Attitude Measurement Method Based on Laser Displacement Sensor and Infrared Vision Camera

Positioning Technology of Tiny Electronic Components Based on Microscope and Computer Vision