Abstract:This research introduces an efficient power rate sliding mode control (PR-SMC) design methodology to control a 4-degree-of-freedom (DOF) manipulator in both joint and workspace areas. The proposed sliding mode control (SMC) strategy focuses on improving the robot manipulator's tracking accuracy by dynamically fine-tuning the control parameters via the genetic algorithms (GA) optimization approach. To achieve the required joint angles, inverse kinematics of the robot are used. In contrast, forward kinematics are applied to ascertain the precise Cartesian position and orientation of the manipulator's end effector based on the actual joint angles. The genetic algorithm is used to find suitable values of the SMC parameters to ultimately achieve the desired performance of robotic tasks. Additionally, the improved sliding mode control law, integrated with the optimization technique, is practically tested on a 4-DOF manipulator to showcase the practicality and effectiveness of the proposed controller. Finally, the efficacy of the proposed control method is demonstrated by comparing its performance with the performances of a manually tuned PR-SMC and the optimized PR-SMC using particle swarm optimization (PSO). This comparison demonstrates the favorable performance of the proposed method. The experimental results showed that the optimized SMC using the GA outperforms the one optimized using PSO, as it provides less tracking error. The manually tuned SMC, which relies on a trial-and-error method, exhibits a larger error than the other two approaches. Although the PSO algorithm is faster than the GA, the GA showed better accuracy and fitting performance.

The Optimal Design of LQR Tip Position Control for Single Flexible Manipulators Based on Hybrid Particle Swarm Algorithm

Weighting matrices design for LQG controller based on data-driven economic performance PSO

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

A Closed-Loop Particle Swarm Optimizer for Multivariable Process Controller Design

Optimization Design Based on PSO Algorithm for PID Controller

Dynamic model of a joint of the manipulator and LQG control optimized with GA and PSO metaheuristics

Swarm control of an unmanned quadrotor model with LQR weighting matrix optimization using genetic algorithm

Self-Tuning Control of Manipulator Positioning Based on Fuzzy PID and PSO Algorithm

Global Optimization Design of Flexible Manipulator Structure and Adaptive Control

A Particle Swarm Optimization Approach For Pid Parameters In Hydraulic Servo Control System

Optimal control and design of flexible manipulators based on H<sub>&#x0221E;</sub> controller

Optimal Design of a Five-Bar Planar Manipulator and Its Controller by Using Different Algorithms for Minimum Shaking Forces and Moments for the Largest Trajectory in a Usable Workspace

Optimal Control And Design Of Flexible Manipulators Based On H-Infinity Controller

MBPOA-based LQR controller and its application to the double-parallel inverted pendulum system.

Optimization of UAV Robust Control Using Genetic Algorithm

A Simple Method Of Tip Trajectory Control For The Flexible Multi-Link Manipulator With Uncertain Parameters

Optimized Power Rate Sliding Mode Control for a Robot Manipulator Using Genetic Algorithms

LQR Optimal Control of Four-steering Vehicle Based on Particle Swarm Optimization Algorithm

Robust LQR control based on multidimensional particle swarm optimization for enhancing the dynamic performance of poultry house system

Multi-Objective Design of State Feedback Controllers Using Reinforced Quantum-Behaved Particle Swarm Optimization