Abstract:In this article, an updated dynamic model of mobile manipulators is presented, which incorporates the effects of wheel slipping and skidding in the mobile base motion equations. This modified model is then used to design an improved control algorithm. The interaction between the robot's mobile platform and manipulator often leads to inaccuracies when using traditional control methods. To address this, a modified control strategy is proposed. Unlike previous research, which faced difficulties directly measuring wheel slippage and traction forces, this work implements a disturbance observer to estimate these unknown parameters. The control algorithm is then designed using the feedback from the observer estimates. First, kinematic control is used to guide the robot along the desired trajectory. Next, dynamic control augmented with the disturbance observer enables robust tracking. Specifically, a disturbance observer-based sliding mode controller is developed for dynamic control of the system. This is further optimized using the state-dependent Riccati equation method. Lyapunov analysis proves system stability and guarantees disturbance estimation errors converge to zero. Simulations on a model of a mobile manipulator confirm the effectiveness of the proposed method. When combining the disturbance observer and sliding mode control, the consumed torque of the wheels and arms is reduced on average by 0.42 Nm and 0.04 Nm, respectively. Defining a cost function and optimizing the torques with the optimal sliding mode control approach further decreases the required torque to 5.17 Nm compared to the basic SMC, while also reducing tracking error by 4.9 mm. Despite platform slippage, the controller performance keeps end effector errors small and within allowable bounds. Experimental validation on a Scout robot demonstrates the feasibility of implementing this method on physical systems. The robot is able to track desired trajectories with acceptable errors. The tracking error in experiments is approximately 54 mm, compared to 13 mm in simulation.

Optimized Power Rate Sliding Mode Control for a Robot Manipulator Using Genetic Algorithms

Inverse kinematic model of multi-section continuum robots using particle swarm optimization and comparison to four meta-heuristic approaches

Optimization of Sliding Mode Control to Save Energy in a SCARA Robot

Optimized sliding mode controller for trajectory tracking of flexible joints three-link manipulator with noise in input and output

Robust Adaptive Sliding Mode Control Using Stochastic Gradient Descent for Robot Arm Manipulator Trajectory Tracking

A three-stage PSO-based methodology for tuning an optimal PD-controller for robotic arm manipulators

Designing an optimal control strategy for a mobile manipulator and its application by considering the effect of uncertainties and wheel slipping

Adaptive incremental sliding mode control for a robot manipulator

Optimal Design of a Five-Bar Planar Manipulator and Its Controller by Using Different Algorithms for Minimum Shaking Forces and Moments for the Largest Trajectory in a Usable Workspace

Interval Fuzzy Type-2 Sliding Mode Control Design of Six-DOF Robotic Manipulator

Optimization of PID trajectory tracking controller for a 3-DOF robotic manipulator using enhanced Artificial Bee Colony algorithm

Design of PID, FLC and Sliding Mode Controller for 2-DOF Robotic Manipulator: A Comparative Study

Modeling of PID controlled 3DOF robotic manipulator using Lyapunov function for enhancing trajectory tracking and robustness exploiting Golden Jackal algorithm

Dynamic model of a joint of the manipulator and LQG control optimized with GA and PSO metaheuristics

Optimized Fuzzy Enhanced Robust Control Design for a Stewart Parallel Robot

Wheel Slippage Compensation in Mobile Manipulators Through Combined Kinematic, Dynamic, and Sliding Mode Control

Sliding mode control design based on the state-dependent Riccati equation: theoretical and experimental implementation

Robust Sliding Mode Control Based on Ga Optimization and Cmac Compensation for Lower Limb Exoskeleton

Pareto design of an adaptive robust hybrid of PID and sliding control for a biped robot via genetic algorithm optimization

Robust Sliding Mode Control for Robots Driven by Compliant Actuators

Takagi-Sugeno Fuzzy Modeling and Control for Effective Robotic Manipulator Motion