Abstract:Particle reinforced metal matrix composites (PR-MMCs) have attracted extensive investigation in material science and engineering. They combine both strength and toughness and show excellent properties such as good wear resistance, corrosion resistance and high temperature properties. Laser depositing of metal matrix composite coatings containing in-situ carbide particles is a research focus in laser surface processing. The essential advantage of the in-situ synthesis technology is that the reinforcements are much more compatible with the matrix and the interface between the reinforcements and the matrix is much cleaner. It has a special advantage in high distribution density and dimension uniformity to in-situ synthesize particles by laser melting precursor powders containing several strong carbide-forming elements (SCFEs) rather than one. Each SCFE has significant effects on the precipitation and distribution of the carbide particles. To investigate the microstructure and properties of the cladded layers, in this paper, the coatings were produced by laser cladding powders containing 2%Ti, 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC (mass fraction) respectively on the surface of a medium carbon steel. The microstructure of the coatings and the carbide particles were studied by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the microstructure of the coatings is typically hypo-eutectic. The in-situ particles have a TiC structure with high content of Zr or W when 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC are added into the cladded powders. Therefore, they are multiple carbides. The interface between the particle and the base material is strong. The optimized distribution of the particles with high distribution density (2x10(4) mm(-2)) and high dimension uniformity (about 1 mu m) are obtained when 1%Ti+1%Zr+10%WC are added. The wear resistance of the coating was tested through ring-on-block wear experiment. It is indicated that laser cladding Fe-based composite coating reinforced by in-situ multiple carbide particles presents excellent wear resistance.

WC/Ni Cemented Carbide Coating and Its Wear Resistance Synthesized by Laser Powder Feeding Cladding

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Synthesizing of WC/Ni Hard Alloy Coating by Laser Cladding with Powder Feeding and the Growth Morphology of WC Crystals

Microstructure and wear resistance of bimodal cemented carbide coating prepared by direct laser powder deposition

Preparation of Ultra-Fine WC-Co Cermet and Its Wear Behavior

Effect of WC on microstructure, molten pool and properties of Ni based coatings by multi-layer laser cladding

Study on Melting–Precipitation Evolution of WC in Ni/WC-12Co Coating during Laser Cladding and Tribological Properties

Formation of WC/Ni hard alloy coating by laser cladding of W/C/Ni pure element powder blend

Friction and wear behavior of Ni-based alloy coatings with different amount of WC–TiC ceramic particles

Microstructural evolution and wear characteristics of laser-clad CoCrFeNiMn high-entropy alloy coatings incorporating tungsten carbide

Microstructure and properties of composite coatings by laser cladding Inconel 625 and reinforced WC particles on non-magnetic steel

The evolution of multi and hierarchical carbides and their collaborative wear-resisting effects in CoCrNi/WC composite coatings via laser cladding

Microstructure evolution and high temperature wear resistance of in-situ synthesized carbides reinforced NiCoFeCrSiMo high entropy alloy coatings fabricated by laser cladding

Effect of WC content on microstructure and properties of high-speed laser cladding Ni-based coating

Effect of WC-12Co on the mechanical and wear performance of laser melting deposition nickel-based alloy

STUDY ON WEAR RESISTANCE OF LASER CALDDING Fe-BASED COMPOSITE COATINGS REINFORCED BY IN-SITU MULTIPLE CARBIDE PARTICLES

Microstructure and mechanical properties of WC-12Co cemented carbide fabricated by laser powder bed fusion on a WC-20Co cemented carbide substrate

Microstructure and Wear Behavior of Hard Ni60 and Soft WC-12Co/Ni25 Coatings Prepared by Laser Cladding on W1813N Non-magnetic Stainless Steel

Microstructure and Wear Behavior of Hard Ni60 and Soft WC-12Co/N125 Coatings Prepared by Laser Cladding on W1813N Non-magnetic Stainless Steel

Influence of WC ceramic particles on structures and properties of laser cladding Ni50-WC coatings

Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature