Abstract:In the current investigation, micro-arc oxidation (MAO) ceramic coatings on aluminum are galvanostatically synthesized at various processing stages in an alkaline silicate system. The resultant coatings are systematically investigated in terms of the following respects: The working voltage and surface sparking evolution over the studied course of MAO are recorded by the signal acquisition system and the real-time imaging, respectively; the phase composition, the surface morphology, and the polished cross-section of the coatings are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) assisted with an energy-dispersive X-ray spectrometer (EDS), respectively. In particular, with the help of a low-rate increase in working voltage, the evolution of the sparks, the energy consumption, and the microstructure development of aluminum in alkaline silicate electrolyte by pre-anodizing are systematically investigated. The results show that the pre-anodized film can accelerate the evolution process of MAO spark and shorten the reaction process in the early stage of MAO reaction, reducing energy consumption and improving the corrosion resistance of the MAO coating. The γ-Al2O3 phase content after pre-anodized is significantly increased in MAO coatings. In particular, the thicker the pre-anodized film (beyond 8 μm) was broken down and fragmentation thinning in the early stage of the MAO process with the presence of micro discharges. This is due to the fact that the electron transition will be released by the emission of radiative recombination and reveals obvious galvanoluminescence (GL) behavior on the surface of the pre-anodized film. Further, based on the present MAO coating microstructure, a model of coating growth after pre-anodized that evolves over time is proposed.

EFFECT OF MICROCRYSTALLIZATION ON PITTING BEHAVIOR OF PURE ALUMINUM

Electrochemical Corrosion Behaviour of Microcrystalline Aluminium in Acidic Solutions

Microelectrochemical Studies of Pit Initiation on High Purity and Ultra High Purity Aluminum

Influence of final-annealing and pretreatment before etching on pitting ability of aluminum foils

Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum

Comparative Study on the Initial Oxidation Behavior of Conventional and Nanocrystalline MCrAlY Coatings - Effect of Microstructure Evolution and Dynamic Mechanisms

Influence of Aging Treatment on the Pitting Behavior Associated with the Dissolution of Active Nanoscale Β-Phase Precipitates for an Al–Mg Alloy

Effect of laser shock peening on the dissolution of precipitates and pitting corrosion of AA6061-T6 with different original surface roughness

Observations of Anomalies in the Anodic Behaviour of Microcrystalline Aluminium

Electrodeposition and Corrosion Behavior of Nanocrystalline Aluminum from A Chloroaluminate Ionic Liquid

The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminium

Impact of Alumina Coatings on Aluminum-Induced Crystallization of Polycrystalline Silicon Films

ELECTROCHEMICAL FEATURES OF THE CORROSION OF AN ALUMINUM-LITHIUM ALLOY IN 3.0% NaCl SOLUTION

The Corrosion Resistance of Al Film on AZ31 Magnesium Alloys by Magnetron Sputtering

In Situ Raman Microscopy of Chromate Effects on Corrosion Pits in Aluminum Alloy

Effect of Pre-Anodized Film on Micro-Arc Oxidation Process of 6063 Aluminum Alloy

Electrochemical noise features of pure aluminum during pitting corrosion in neutral NaCl solution

Electrochemical Behaviour of Microcrystalline Aluminium in Neutral Fluoride Containing Solutions

Effect of LBE corrosion on microstructure of amorphous Al2O3 coating by magnetron sputtering

A study of the corrosion behavior of AZ31 Mg alloy in depth direction after surface nanocrystallization

The Effect of Chromium on the Gamma to Alpha Phase Transition of Alumina Coating Formed on 316L SS by a Cathodic Micro Arc Deposition (CMAD) Process