Abstract:The microstructures and corrosion behaviors of as-cast, T4-treated, and T6-treated Mg-6Gd-3Y-0.5Zr alloys were systematically investigated by SEM, TEM, immersion test, and electrochemical corrosion test. The results show that the microstructure of the as-cast alloy is composed of α-Mg and Mg 24 (Gd, Y) 5 eutectic phase, and in T4-treated alloy, Mg 24 (Gd, Y) 5 phase dissolves into the α-Mg matrix, leading to an increase in the (Y, Gd)H 2 phase. After T6 treatment, nanoscale Mg 24 (Gd, Y) 5 phase dispersedly precipitates from the α-Mg matrix, and exhibits a specific orientation relationship with the . The corrosion resistance of the Mg-6Gd-3Y-0.5Zr alloys can be ranked in the following order: T6-treated alloy exhibits the highest corrosion resistance, followed by the T4-treated alloy, and finally, the as-cast alloy. The corrosion products of the alloys are all composed of MgO, Mg(OH) 2 , Gd 2 O 3 , Y 2 O 3 , and MgCl 2 . The corrosion behavior of Mg-6Gd-3Y-0.5Zr alloy is closely related to the precipitated phase. By establishing the relationship between corrosion rate, hydrogen evolution rate, and corrosion potential, it is further demonstrated that during the micro galvanic corrosion process, the coarse Mg 24 (Gd, Y) 5 phase in the as-cast alloy undergoes extensive dissolution, and (Y, Gd)H 2 phase promotes the dissolution of the α-Mg matrix in the T4-treated alloy, intensifying the hydrogen evolution reaction. The T6-treated alloy, with dispersive precipitation of nanoscale Mg 24 (Gd, Y) 5 phase, exhibits better corrosion resistance performance.

INFLUENCE OF YTTRIUM AND GADOLINIUM ON CORROSION RESISTANCE OF AZS1 MAGNESIUM ALLOYS

The Influence of Ca and Y on the Microstructure and Corrosion Resistance of Vacuum Die Casting AZ91 Alloy

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effect of Gd on microstructure and stress corrosion cracking of the AZ91‐extruded magnesium alloy

Influence of Rare Earth Element (Y) on Microstructure and Corrosion Behavior of Hot Extrusion AZ91 Magnesium Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Effects of Y, Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy

Effect of ZrSiO4 Concentration on the Microstructure and Corrosion Resistance of MAO Coatings Formed on AZ91 Magnesium Alloy

Roles of micro-alloyed Y and Gd in improving the corrosion resistance and mechanical properties of pure Mg

EFFECT OF CERIUM AND LANTHANUM ALLOYING ON MICROSTRUCTURE AND CORROSION BEHAVIOR OF AZ91 MAGNESIUM ALLOY

Effect of Yttrium on the Corrosion Behaviour of 09crcusb Alloy in Concentrated Sulphuric Acid

Improvement of Mechanical Properties and Corrosion Resistance of As‐Extruded Mg–2Zn–2Al–0.3Mn Alloy Through Y Addition

Effect of Microstructure on the Corrosion Behavior of as-cast and Extruded Mg–Sn–Y Alloys

Corrosion behavior of as-cast AZ91 magnesium alloy with VN particle additions in NaCl solution

Effects of zirconium addition on electrochemical and mechanical properties of Mg-3Zn-1Ca-1RE alloy

Comparison of the Corrosion Behaviors of Mg–Gd–Y–Zn–Zr Alloys Fabricated by Different Preparation Methods

Effect of heat treatment on corrosion behaviors of Mg-6Gd-3Y-0.5Zr alloy

Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy

Effects of micro-alloying Ag on microstructure, mechanical properties and corrosion behavior of extruded Mg-2Zn-0.2Ca-xAg alloys

Effect of minor Gd addition on microstructure, mechanical performance, and corrosion behavior of Mg–Y–Gd alloys