Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Study on the evaluation method of NC machining time for mould cavity plate

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Design Method and Numerical Control Machining Principle for an Arbitrary N-Polygon Noncircular Section

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Study on Analytical Model of Surface Roughness Prediction in NC Machining

A Computer Aided Tool Selection System For 3d Die/Mould-Cavity Nc Machining Using Both A Heuristic And Analytical Approach

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Judging of Machining Feasibility and Calculation of Midsection for the Five-Axis Milling of Shrouded Centrifugal Impeller

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

CNC Machining Technology for the Sliding Block Parts with Special Shape in the Automobile Mold

Numerical Control Machining and Manufacturing Technology Analysis of Mechanical Die Based on Computer Data Control System

STEP-NC feature-oriented high-efficient CNC machining simulation

Large Nc Machining Fast Knife Mould Based on Image Technology

An automated approach for machining allowance evaluation of casting parts

Research on Modeling of Milling Force of Ball-End Mill Cutter in Multi-hardness Splicing Area of Automobile Panel Die Steel

A General Model for Machinable Features and Its Application to Machinability Evaluation of Mechanical Parts

An investigation on machining large removal cylindrical parts using WEDM with contour approximation method

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Study on Precision Modeling and Prediction of Five-axis NC Machine Tool

Research on feasible region of specific cutting energy and surface roughness in high-speed dry milling of 30CrMnSiNi2A steel with CVD and PVD coated inserts