The Quantitative TOFD Detection of Inclined Crack in Bult Weld Based on Geometric Method

康达,张树潇,金士杰,刘丽丽,张侃,张东辉,罗忠兵,杨会敏,林莉

DOI: https://doi.org/10.11973/wsjc201604001

2016-01-01

Abstract:To solve the problem that the inclined crack in butt weld of alloy steel is difficult to be quantified,a method of time-of-flight-diffraction (TOFD)for inclined crack is proposed.There is a triangle composed by the interval of two B-scans along with the direction of vertical section of weld profile,the difference of moving distance of encoder where the acoustic distance is minimum and the inclined crack.Taking advantage of this geometric relationship,the length and tilting angle of inclined crack can be detected quantitatively.In the simulation ,artificial inclined crack with lengths of 5,10,60 mm and tilting angles from 10°to 90°were made.The simulation results showed that the quantitative error of angle was less than 1°,and the relative error of length was less than 5%.In the experiment,attention was paid to quantitative detection of inclined crack whose length was 60mm and tilting angle was from 30° to 60°.The result presented the maximum of absolute error of angle and length was 0.29° and 0.94 mm,respectively.