Abstract:Airborne ultrasonic testing of lightweight, structured composite materials enables fast and contact-free non-destructive testing in aerospace and avoids material degradation due to contact with a coupling liquid. Established resonant air-coupled transducers consist of piezocomposite materials and several matching layers or more advanced materials like charged cellular polypropylene. The relaxation time and the specific frequency of such mechanical ultrasound emitters limit the spectrum of applications for each device. A short pulse length is key for reliable defect detection and each component at test can be best characterized at material- and geometry-specific frequencies. Here we show that focused thermoacoustic transducers are suited for testing lightweight, structured composite plates. Since the ultrasound is generated in air, these transducers show no resonance behavior and emit a broadband acoustic spectrum between 1.2 kHz and 1 MHz. Composite specimens of 3 mm to 9 mm thickness made of polylactide with a honeycomb structure were tested. Flat bottom holes were introduced to quantify the spatial resolution of the imaging method inside the strongly anisotropic specimen. As no broadband receivers are available yet, cellular polypropylene transducers were used as receivers, which limits the bandwidth of the method towards the bandwidth of the receiver. Nevertheless, we demonstrate the competitiveness of the thermoacoustic transducer compared to mechanical emitters at their respective resonance frequencies. Because a thermoacoustic transmitter features a nearly ideal pulse width, a single transmitter can be coupled with receivers with different resonance frequencies. With the development of broadband ultrasound receivers, air-coupled ultrasound spectroscopy will likely be possible in the near future. The analyzed transducer holds the potential to speed up testing during production and maintenance in aerospace and automotives. Its combination with a broadband receiver could also expand the application field of air-coupled ultrasonic testing from a qualitative error detection towards a quantitative, spatially resolved analysis of mechanical material properties.

Application of Air-Coupled Ultrasonic Technology for Nondestructive Testing of Aerospace Composites

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Development of Portable Ultrasonic Non-Destructive Test System for Viod Content of Carbon-Fiber Reinforced Plastics

Thickness Measurement of Composite Material Using Eddy Current Testing

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

Non-contact detection of the interfacial microdefects in metal/CFRP hybrid composites using air-coupled laser ultrasound

Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review

The thermoacoustic effect and its application in air-coupled testing of composite structures

Nondestructive testing and evaluation techniques of defects in fiber-reinforced polymer composites: A review

Visualized characterization of diversified defects in thick aerospace composites using ultrasonic B-scan

Advances, limitations and prospects of nondestructive testing and evaluation of thick composites and sandwich structures: A state-of-the-art review

Nondestructive Testing of Composite Materials: An In-Depth Study Using Ultrasonic Immersion Inspection

Evaluation of Defect Detection in Aluminium, CFRP and Epoxy Resin Plates Using Non-contact Air-Coupled Ultrasonic Waves

Air-coupled transducer tilted C-scan for delamination introduced during the manufacturing process in CFRP plates

A novel nondestructive testing method for honeycomb structure using acoustic band gap

Nonlinear Ultrasonic Techniques for Testing Micro-Defects in Metal Matrix Composite Structure

Overview of Microwave NDT Techniques for Fibre-Reinforced Polymer Composites

Specific Features of Nondestructive Testing of Polymer and Composite Materials Using Air-Coupled Ultrasonic Excitation and Laser Vibrometry

Measurement Methodology: Terahertz Technique: A Non-Destructive Testing Method for Composite Defect Detection

Nondestructive Evaluation of Bond Quality of Adhesively Joined Carbon Fiber/nylon 6 Composites

Defect identification in thick porous and wavy composites with hybrid use of ultrasound non-reciprocity and scattering