Abstract:A potential flow code is extended to include dipole elements to handle potential flow problems for offshore structures consist of thin shell geometry with both sides exposed to ocean waves. The solution on dipole elements can be represented by the drop of fluid potential across the thin shell surface. By adjusting the porous effect parameter, such a dipole element model can be applied for the solid impervious thin shell structures, porous surfaces and even the imaginary sheets attached to the sharp edges where the local flow dissipation occurs. Special attention is paid on different approaches to evaluate the drift forces on floating bodies with porous surface, including the traditional far field and pressure integration methods as well as the control surface integration approach. The solutions from the BEM model on excitation forces, off-body kinematics and drift forces are verified against the analytical solutions for a concentric porous cylinder system fixed at the seabed. The numerical performance of a two-layer source/sink model with very small gaps is investigated, taking the results from the corresponding dipole element model as the baseline. It is suggested that the mesh size requirement from DNV-RP-C205 is too strict for the two-layer panel model in the case that the exact fluid velocity on both sides of the wall is not needed. The proposed model is demonstrated in two case studies which involve the internal fluid dynamics inside tanks with interior web frame structures of a floating barge for one case and the damping effects from the sharp edge of a box barge model for the other case.

Application of BEM to Design of Impressed Current Cathodic Protection System for Jacket Platform

Boundary Element Method Application For The Impressed Current Cathodic Protection Of An Offshore Platform

Solving the ECG forward problem by means of standard h- and h-hierarchical adaptive linear boundary element method: comparison with two refinement schemes.

A Coupled FEM-BEM Methodology to Calculate 3D Earth Surface Potentials Caused by HVDC Return Currents

Cathodic Protection of A Container Ship Using A Detailed BEM Model

Prediction of shielding effectiveness of some metallic structrures on ship platform

Numerical simulation of cathodic protection for jack-up platform

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Computational Approach to the Current and Chloride Ions Distribution of Reinforced Concrete Cathodic Protection System

Design of ICCP Cathodic Protection System for Offshore Wind Power Jacket

Boundary Element Formulation Enforcing High-Order Surface Impedance Boundary Conditions for Axisymmetric Eddy Current Problems

Application of a BEM Model with Dipole Elements

A Novel Approach to Deal with Periodic Boundary Conditions for 3d Eddy Current Field Problems

A Line Model-Based Fast Boundary Element Method for the Cathodic Protection Analysis of Pipelines in Layered Soils

Numerical Simulation of the Impressed Current Cathodic Protection System for a Reinforced Concrete Structure

The Application of Boundary Element Method to the Resistance Calculation Problem in Designing Flat Panel Displays

Calculation Of Eddy Current Field In The Ascending Flange For The Bushings And Tank Wall Of A Large Power Transformer

Hydrodynamic Design of Horizontal-Axis Marine Current Turbine Based on BEM Theory

Numerical Simulation to Optimize Impressed Current Cathodic Protection Systems for Rc Structures

Iterative dual BEM solution for water wave scattering by breakwaters having perforated thin plates

A study on optimization of anode groundbeds for cathodic protection of deep well casings based on the boundary element method