Experimental and numerical study on the falling film flow process on the outer wall of dome cylinder
Hao Sun,Wei Huang,Chang Zhao,Zhiyuan Liu,Yujian Fang,Jiayi Jin,Ling Li,Huinan Yang
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2023.124542
IF: 5.2
2023-08-03
International Journal of Heat and Mass Transfer
Abstract:The passive containment cooling system (PCCS) is crucial for ensuring the safety of nuclear power plants , and the thickness and temperature of the falling film on its outer wall are important parameters that determine the heat and mass transfer performances. In this paper, a compact liquid film thickness and temperature simultaneous measurement system was developed to provide a measurement method, which is based on the absorption spectroscopy technology, and then the measurement accuracy was verified by using a calibration tool. The results showed that the mean relative error of the liquid film thickness and temperature measurements from the known values were about 3.4% and 0.4%, respectively. On this basis, this system was used to study the falling film process on the outer wall of the dome cylinder analogous to the containment under different working conditions and combined with numerical simulation for comparison. The results showed that the two methods have good consistency. The variation of the liquid film heat transfer coefficient for various operating conditions was further analyzed. It was found that the average thickness of the falling film is positively correlated with the liquid flow rate, but negatively correlated with the temperature and heat transfer coefficient. In summary, this system can accurately study the falling film process on the outer wall of the dome cylinder, which is expected to accurately analyze the heat and mass transfer process in the PCCS and provide data support for its design and optimization.
engineering, mechanical,thermodynamics,mechanics