Abstract:Sulfamic acid (SA) has a low acid-rock reaction rate and can be used for deep high-temperature acidizing. However, the inhibition effect of existing corrosion inhibitors at deep high temperatures is greatly reduced. Through experiments, it is found that corrosion inhibitors such as imidazoline (OAI), cinnamaldehyde (CA), C14 quaternary ammonium salt (C14-GN), and potassium iodide (KI) have good corrosion inhibition effect, the average corrosion inhibition rate can reach 99 %, and the corrosion rate is less than 2 g/m2 h. The experimental results show that the film formation of a single inhibitor is uneven and the pitting corrosion is serious. In contrast, the mixed-use of many kinds of inhibitors can effectively inhibit the pitting corrosion, and the corrosion rate is less than 1.6 g/m2 h. And it can effectively inhibit pitting corrosion. At 363 K, the corrosion inhibition rate is 99.9 % and the corrosion rate is 1.1 g/m2 & sdot;h. Through the orthogonal test, it is concluded that the best inhibitor ratio is OAI: CA: C14-GN: KI = 3:3:3:2. The optimized inhibitor has the best synergistic effect, can play an important role at high temperature, make the film uniform and dense, and improve the corrosion inhibition effect of the solution of sulfamic acid with the investigated inhibitor.

Corrosion Inhibition of Kudingcha Extract for N80 Steel

Inhibition Effect of Ilex Kudingcha CJ Tseng (kudingcha) Extract on J55 Steel in 3.5wt% NaCl Solution Saturated with CO2

Relevance of Electrochemical and Surface Studies to Probe Zanthoxylum Schinifolium (sichuan Pepper) As an Effective Corrosion Inhibitor for N80 Steel in CO2 Saturated 3.5% NaCl Solution

A study on the inhibition of N80 steel in 3.5% NaCl solution saturated with CO 2 by fruit extract of Gingko biloba

Corrosion Inhibition of N80 Steel Using Novel Diquaternary Ammonium Salts in 15% Hydrochloric Acid

A Study on the Inhibition of J55 and P110SS Steel in 3.5% NaCl Solution Saturated with CO<sub>2</sub> by Seed Extract of <i>Momordica charantia </i>(Karela)

Corrosion Inhibition Effect Research of Compound Corrosion Inhibitor for N80 Steel in HCl Solution Medium

Use of Electrochemical and Secm Techniques to Probe Gingko Biloba Leaves Extract for Corrosion Inhibition of P110 Steel in 3.5% Nacl Solution Saturated with Co2

Investigation of some Porphyrin Derivatives as Inhibitors for Corrosion of N80 Steel at High Temperature and High Pressure in 3.5% NaCl solution containing carbon dioxide

A Study on the Inhibition of J55 and P110SS Steel in 3.5% NaCl Solution Saturated with CO<sub>2</sub> by Seed Extract of <i>momordica Charantia &Lt;/i>(karela)

Anti-corrosion Performance of Composite Inhibitor for N80 Steel in NaIO4 Solution

Gingko Biloba Fruit Extract As an Eco-Friendly Corrosion Inhibitor for J55 Steel in CO2 Saturated 3.5% NaCl Solution

Synergistic Effect Of Mannich Base And Sodium Tungstate As Corrosion Inhibition For N80 Steel

Chitosan Oligosaccharide Derivatives As Green Corrosion Inhibitors for P110 Steel in a Carbon-Dioxide-saturated Chloride Solution

Inhibition Effect of Pomelo Peel Extract for N80 Steel in 3.5% NaCl Saturated with CO 2 Solution

Influence of Corrosion Products on the Inhibition Effect of Pyrimidine Derivative for the Corrosion of Carbon Steel under Supercritical CO2 Conditions

Corrosion Inhibition by Sorbitol/Diethylenetriamine Condensation Product for Carbon Steel in 3.5% NaCl Saturated Ca(OH)2 Solution

Optimization and Evaluation of Corrosion Inhibitors for N80 Steel in Sulfamic Acid Solutions

The Extraction of a Natural Dye Berberine and Evaluation of its Corrosion Inhibition properties for P110SS Steel

Inhibition of the Corrosion of X70 and Q235 Steel in CO2-saturated Brine by Imidazoline-Based Inhibitor

N, S Co-Doped Carbon Dots As Effective Corrosion Inhibitor for Carbon Steel in CO2-saturated 3.5% NaCl Solution