Abstract:Green corrosion inhibitors have an important role in reducing the corrosion rate of metals and the effects of toxic chemicals in the environment. In this study, the inhibition effect of pomegranate peel extract ( PPE ) with concentration of 0.5, 1, 1.5, 2, 2.5 and 3 g/L on the aluminum 1050 alloy corrosion behavior in the nitric acid solution investigates using the weight loss, electrochemical techniques, scanning electron microscope ( SEM ), atomic force microscope ( AFM ), contact angle images, gas chromatography-mass spectrometer ( GC-MS ) analysis, fourier transform Infrared spectroscopy ( FTIR ) and ultraviolet radiation ( UV-IR ). And, the ( UV-IR ), ( GC-MS ), and FTIR results confirm the presence of many organic compounds (Containing the N , S , and O atoms), which are responsible for inhibitor performance and absorption phenomena. Meanwhile, the electrochemical impedance results ( EIS ) indicate that the double layer capacity decreases and the corrosion resistance (Corrosion current density ( i corr ) from 0.128 to 0.009 mA/cm 2 ) increases with the increase of the inhibitor concentration (The inhibition efficiency increased with increasing the inhibitor concentration from % 54.29 to the % 92.58 at (1 to 3 g/L ). In addition, the corrosion current density decreases with the increase of the inhibitor concentration using the potentiodynamic polarization ( PDP ) test. However, the corrosion rate enhances with increasing the temperature. From the other hand, quantum chemical ( QC ) calculation and molecular dynamics ( MD ) simulation perform to investigate the theory of the adsorption mechanism. According to these studies, the adsorption of PPE on the aluminum 1050 alloy surface is agreement with the langmuir isotherm and as a result it is a mixed-type inhibitor. In final the SEM and AFM results show that the corrosion rate of the aluminum 1050 alloy surface is significantly reduced after the addition of the inhibitor to the corrosive environment. Furthermore, the contact angle image shows that the inhibited aluminum surface has a hydrophobic property in an aqueous solution. And, the QC calculation and MD simulation clarify well the thin layer formation due to the good adsorption of inhibitor (PPE) on the surface of aluminum 1050 alloy in the nitric acid solution, theoretically. It is concluded that PPE will inhibit the surface of aluminum against the corrosion agents in acidic environment and can use as a green inhibitor.

Inhibition Effect of Pomelo Peel Extract for N80 Steel in 3.5% NaCl Saturated with CO 2 Solution

Adsorption and corrosion of renewable inhibitor of Pomelo peel extract for mild steel in phosphoric acid solution

A study on the inhibition of N80 steel in 3.5% NaCl solution saturated with CO 2 by fruit extract of Gingko biloba

Relevance of Electrochemical and Surface Studies to Probe Zanthoxylum Schinifolium (sichuan Pepper) As an Effective Corrosion Inhibitor for N80 Steel in CO2 Saturated 3.5% NaCl Solution

Peach Pomace Extract as Novel Cost-Effective and High-Performance Green Inhibitor for Mild Steel Corrosion in NaCl Solution: Experimental and Theoretical Research

Peach Pomace Extract as Efficient Sustainable Inhibitor for Carbon Steel Against Chloride-Induced Corrosion

Pomelo leaves extracts characterization and utilization as eco friendly corrosion inhibitor for carbon steel in different condition acidic media

SECM/SKP and SVET studies on mitigation of N80 steel corrosion by some polymers

Use of Electrochemical and Secm Techniques to Probe Gingko Biloba Leaves Extract for Corrosion Inhibition of P110 Steel in 3.5% Nacl Solution Saturated with Co2

Study on the Corrosion Inhibitory Performance of Pomacea Canaliculata Extract As a Corrosion Inhibitor for Carbon Steel in Acidic Environments

A Study on the Inhibition of J55 and P110SS Steel in 3.5% NaCl Solution Saturated with CO<sub>2</sub> by Seed Extract of <i>Momordica charantia </i>(Karela)

Pectin-amino Acid Derivatives As Highly Efficient Green Inhibitors for the Corrosion of N80 Steel in CO2-saturated Formation Water

Investigation of some Porphyrin Derivatives as Inhibitors for Corrosion of N80 Steel at High Temperature and High Pressure in 3.5% NaCl solution containing carbon dioxide

Investigation on the Inhibition Behavior of a Pentaerythritol Glycoside for Carbon Steel in 3.5% NaCl Saturated Ca(OH)2 Solution

A study of pomegranate peel extract effect on corrosion inhibition performance on aluminum in HNO 3 solution

Gingko Biloba Fruit Extract As an Eco-Friendly Corrosion Inhibitor for J55 Steel in CO2 Saturated 3.5% NaCl Solution

A Combined Electrochemical and Theoretical Analysis of Environmentally Benign Polymer for Corrosion Protection of N80 Steel in Sweet Corrosive Environment

A Study on the Inhibition of J55 and P110SS Steel in 3.5% NaCl Solution Saturated with CO<sub>2</sub> by Seed Extract of <i>momordica Charantia &Lt;/i>(karela)

Corrosion Inhibition of Kudingcha Extract for N80 Steel

Evaluation of Adding Natural Gum to Pectin Extracted from Ecuadorian Citrus Peels as an Eco-Friendly Corrosion Inhibitor for Carbon Steel

Theoretically and Experimentally Exploring the Corrosion Inhibition of N80 Steel by Pyrazol Derivatives in Simulated Acidizing Environment