Abstract:Eco-friendly inhibitors have attracted considerable interest due to the increasing environmental issues caused by the extensive use of hazardous corrosion inhibitors. In this paper, environmentally friendly PDG-g-PANI/Al2O3 composites were prepared by a low-cost inverse emulsion polymerization for corrosion inhibition of mild steel (MS) and stainless steel (SS). The PDG-g-PANI/Al2O3 composites were characterized by different techniques such as X-ray diffraction (XRD), UV/Vis, and FTIR spectroscopy. XRD measurements show that the PDG-g-PANI/Al2O3 composite is mostly amorphous and scanning electron micrographs (SEM) reveal a uniform distribution of Al2O3 on the surface of the PDG-g-PANI matrix. The composite was applied as a corrosion inhibitor on mild steel (MS) and stainless steel (SS), and its efficiency was investigated by potentiodynamic polarization measurement in a 3.5% NaCl and 1 M H2SO4 solution. Corrosion kinetic parameters obtained from Tafel evaluation show that the PDG-g-PANI/Al2O3 composites protect the surface of MS and SS with inhibition efficiencies of 92.3% and 51.9% in 3.5% NaCl solution, which is notably higher than those obtained with untreated epoxy resin (89.3% and 99.5%). In particular, the mixture of epoxy/PDG-g-PANI/Al2O3 shows the best performance with an inhibition efficiency up to 99.9% on MS and SS. An equivalent good inhibition efficiency was obtained for the composite for 1M H2SO4. Analysis of activation energy, formation enthalpy, and entropy values suggest that the epoxy/PDG-g-PANI/Al2O3 coating is thermodynamically favorable for corrosion protection of MS and exhibits long-lasting stability.

A Combined Electrochemical and Theoretical Analysis of Environmentally Benign Polymer for Corrosion Protection of N80 Steel in Sweet Corrosive Environment

Analyses of New Electrochemical Techniques to Study the Behavior of Some Corrosion Mitigating Polymers on N80 Tubing Steel

SECM/SKP and SVET studies on mitigation of N80 steel corrosion by some polymers

Synthesis and Investigation of Pyran Derivatives As Acidizing Corrosion Inhibitors for N80 Steel in Hydrochloric Acid: Theoretical and Experimental Approaches

Anti-corrosion investigation of pyrimidine derivatives as green and sustainable corrosion inhibitor for N80 steel in highly corrosive environment: Experimental and AFM/XPS study

Comprehensive Investigation of Steel Corrosion Inhibition at Macro/micro Level by Ecofriendly Green Corrosion Inhibitor in 15% HCl Medium.

Poly(methyl Methacrylate-Co-n-vinyl-2-pyrrolidone Polymer As Inhibitor for Mild Steel Corrosion in Acidic Media

Chromenopyridin Derivatives As Environmentally Benign Corrosion Inhibitors for N80 Steel in 15% HCl

Synthesis of novel nano polymeric composite of zinc oxide and its application in corrosion inhibition of tubular steel in sweet corrosive medium

Insight into the Anti-Corrosion Performance of Synthesized Novel Nano Polymeric Material of SiO2 for the Protection of J55 Steel in 3.5 Wt% NaCl Solution Saturated with Carbon Dioxide

Epoxy prepolymer as a novel anti-corrosive material for carbon steel in acidic solution: Electrochemical, surface and computational studies

Corrosion-Protection Performance of Dedoped Poly(N-ethylaniline-co-aniline)

Experimental and Computational Approach on the Development of a New Green Corrosion Inhibitor Formulation for N80 Steel in 20% Formic Acid.

Theoretically and Experimentally Exploring the Corrosion Inhibition of N80 Steel by Pyrazol Derivatives in Simulated Acidizing Environment

Corrosion Inhibition of N80 Steel Using Novel Diquaternary Ammonium Salts in 15% Hydrochloric Acid

An Impending Inhibitor Useful for the Oil and Gas Production Industry: Weight Loss, Electrochemical, Surface and Quantum Chemical Calculation

Investigation of Alumina-Doped Prunus domestica Gum Grafted Polyaniline Epoxy Resin for Corrosion Protection Coatings for Mild Steel and Stainless Steel

5,10,15,20-Tetra(4-pyridyl)-21h,23h-porphine As an Effective Corrosion Inhibitor for N80 Steel in 3.5% Nacl Solution

Corrosive inhibition behavior of well-dispersible aniline/p- phenylenediamine copolymers

Aminoantipyrine derivatives as a novel eco-friendly corrosion inhibitors for P110 steel in simulating acidizing environment: Experimental and computational studies

Protective behaviour of naphthylamine derivatives for steel reinforcement in the simulated concrete pore solutions: Detailed experimental and computational explorations