Abstract:The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1-1 mm, 3.298 kN and 4.1 mm for the case of 0.5-0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5-1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1-1 mm case was the welding current; for the 0.5-0.5 mm case, it was pulse welding; and for the 0.5-1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg-Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

Prediction Model of Weld Forming Based on Rotating Arc Sensing Method and Neural Network

Research on the Online Detection Method of Fillet Welding Arc Stability Based on the Adaptive Model of Rotating Arc Stability Sensor

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Prediction of Double-Sided Arc Welding Deformation Based on Dynamic Heat Distribution Model and TEP-FE Approach

Prediction of welding residual stress and deformation in electro-gas welding using artificial neural network

Prediction of Bead Geometry with Changing Welding Speed Using Artificial Neural Network

The Choice Of Welding Parameters And Prediction Of Weld Seam Dimensions For Welding Rapid Prototyping

Prediction of gas metal arc welding parameters based on artificial neural networks

The prediction of residual stress of welding process based on Deep Neural Network

Prediction of laser-welded deformation using artificial neural networks

Prediction and optimization method for welding quality of components in ship construction

Prediction of Electron Beam Welding Penetration Depth Using Machine Learning-Enhanced Computational Fluid Dynamics Modelling

Neural Networks Applied for Predictive Parameters Analysis of the Refill Friction Stir Spot Welding Process of 6061-T6 Aluminum Alloy Plates

Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

A comparative study of multiple regression analysis and back propagation neural network approaches on plain carbon steel in submerged-arc welding

A hierarchical visual model for robot automatic arc welding guidance

Prediction and optimization of joint quality in laser transmission welding using serial artificial neural networks and their integration with Markov decision process

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Intelligent Prediction of E4303 Electrode Mechanical Properties Based on Fuzzy Neural Network

Virtual Simulation of Weld Morphology for V-groove Multi-layer Welding