Abstract:The forming quality of profiled ring rolling not only encompasses macroscopic accuracy but also emphasizes the microstructure. Due to the multiple process parameters and complex metal flow during profiled ring rolling, the various forming defects are difficult to control and difficult to study theoretically. The objective of this study is to establish a comprehensive method for evaluating the forming quality of profiled rings, which considers both the macroscopic forming accuracy and the microstructure. Firstly, the synthetic size factor was defined, and the evolutionary relation between the section forming rate and the diameter growth rate of E-section ring rolling was analyzed in detail. The synthetic size factor can be used to describe the dimensional evolution and evaluate the forming accuracy of the profiled ring rolling process. Taking into full consideration the features of intermittent deformation in local areas, a microstructure evolution model of the Inconel718 alloy during E-section ring rolling, which can accurately predict the recrystallization volume fraction and average grain size of the final ring, was established. Then, combined with finite element simulation, the influence of the rotation speed of the driving roll on the macro-size evolution and microstructure was systematically analyzed. The results indicate that there is often a discrepancy between dimensional accuracy and microstructure uniformity in the optimization trend. For instance, the higher the rotation speed of the driving roll is, the more uniform the microstructure is, but the more difficult it is for the section profile to form. Finally, combined with response surface methodology (RSM), multi-parameter optimization was carried out with section forming accuracy and grain uniformity as the optimization objectives. By using the optimal parameters, an E-section ring with a complete profile and a uniform microstructure was obtained, with a maximum prediction error of the recrystallization volume fraction lower than 5%. The results show that the macroscopic and microscopic quality evaluation methods proposed in this study, as well as the optimization method combining RSM, can be effectively applied to the process optimization of profiled ring rolling.

Combined Optimization on Dynamic Parameters for Radial-axial Ring Rolling Based on RSM and FEM

Evaluation Methods and Coupled Optimization at Macro- and Micro-Scales for Profiled Ring Rolling of Inconel718 Alloy

Multi-objective optimization of cavity design for GH4738 superalloy profile ring rolling process based on FEM and RSM

Multi-objective optimization of parametric design for profile ring rolling process based on residual stress control

Parameters Optimization of Tailor Welded Blank Forming Process

Buckling Defect Optimization of Constrained Ring Rolling of Thin-Walled Conical Rings with Inner High Ribs Combining Response Surface Method with FEM

Analytical calculation model for radial-axial coordinated feed strategy in large-scale flat ring rolling based on ultimate bending moment

Multi-objective optimization of concave radial forging process parameters based on response surface methodology and genetic algorithm

Parameter optimization in hot precision forging process of synchronizer ring based on grey relational analysis and response surface method

An innovative spinning-rolling process and its intelligent FE modelling for big-tapered profiled ring disk

Forming process chain for manufacturing complex conical-section profiled rings: On a co-design method

FEM simulation and optimization on rotating extrusion of bi-metal rod with constant shear friction

Numerical simulation and experimental study on geometry variations and process control method of vertical hot ring rolling

Numerical Model Simulation of the Double-Roll Rotary Forging of Large Diameter Thin-Walled Disk

Optimization of Processing Parameters of Aluminum Alloy Cylindrical Parts Based on Response Surface Method during Hydromechanical Deep Drawing

Multi-scale Simulation of Recrystallization during Rolling of Large 2219 Aluminum Alloy Rings

Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel

Optimization Design Of A Novel X-Type Six-High Rolling Mill Based On Maximum Roll System Stiffness

Multi-response optimization of the bulging-processed parameters for enhanced residual stress state of TC4-rolled rings

Optimization Design of Extrusion Roller of RP1814 Roller Press Based on ANSYS Workbench

Study on Cavity Filling Defects and Tensile Properties of L-Shaped Profiled Rings