Abstract:Abstrast Low carbon steel was suitable for industrial fields due to its low price, wide application range and excellent comprehensive performance. However, there were still shortcomings such as poor wear resistance and corrosion resistance in special occasions. In hence, this paper carried out a study on the strengthening process of low-carbon steel parts surface deposition. The TIG welding arc welding method was used to study the strengthening performance of the arc-enhanced medium entropy alloy additive layer. To analyze the elements and microstructure of the medium entropy alloy additive layer by x-ray diffractometer(XRD), scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and other modern analysis methods. The micro-hardness, friction and wear and electrochemical corrosion detection methods were used to study the friction and wear and corrosion resistance of the medium entropy alloy additive layer. The results show that the microstructure of the medium entropy alloy additive layer is a typical lamellar pearlite, which is wrapped with face-centered cubic solid solution (FCC) and unevenly distributed in the additive layer. The microhardness of the medium entropy alloy additive layer is significantly higher than that of the substrate. As the friction and wear load increases, the friction coefficient of the medium entropy alloy additive layer gradually decreases. The wear rate of the additive layer is much lower than that of the substrate and the wear resistance is doubled compared to the substrate. The form of wear is mainly abrasive wear and fatigue spalling wear. The medium entropy alloy additive layer has excellent corrosion resistance. Its corrosion rate is about one tenth of the substrate. The arc cladding medium entropy alloy powder core wire can meet the surface strengthening requirements of low-carbon steel parts and provide engineering basis for the low-carbon steel large-scale, multi-domain, high-level application.

Study on the Relationship Between Technology and Properties of Arc Surfacing for Tungsten Carbide Flux-cored Wires with Wear Resistance

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Effect of Cr and W on microstructure and wear resistance of arc additive manufactured flux-cored wire for railway wheels

High Temperature Erosion Properties of Arc-Sprayed Coatings Using Various Cored Wires Containing Ti–Al Intermetallics

Corrosion Resistance and High Temperature Wear Behavior of Carbide-Enhanced Austenite-Based Surfacing Layer Prepared by Twin-Wire Indirect Arc Welding

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Influence of Electromagnetic Stirring on Properties of High Hardness and Wear Resistant Surfacing Metal

Wear-resistance Performance of Spray-welding Coating by Plasma Weld-surfacing

Study on the microstructure and wear resistance of AlCrCuFeNiTix high entropy alloys for surfacing welding

Microstructure and Properties of Abrasive Wearability Hardfacing Welding Based on TiC-VC

Study on Arc-ultrasonic Improving Overlaying Welding and Thermal Spaying Quality

Strengthening Mechanism and Properties of Co–WC Composite Coatings Deposited by Plasma‐transferred Arc Welding

Microstructure and corrosive-wear resistance of surfacing layers for underwater wet welding

Thermodynamic aspects of WO3 tungsten oxide reduction by carbon, silicon, aluminum and titanium

STUDY ON SURFACING MATERIALS AND TECHNOLOGY FOR HOT ROLLING MILL ROLLS

Effect of cooling conditions on microstructure evolution and wear behavior of high chromium cast iron hardfacing layer

Effect of medium entropy alloy powder-core wire on friction wear and corrosion resistance of arc cladding additive layer

Effect of Nano-Y2O3 on the Microstructure and Properties of Fe-Cr-C-N-Al Surfacing Alloy

Influence of different arc erosion durations on the wear properties of carbon skateboards/contact wires under low temperature

Effect of Fe content on the friction and abrasion properties of copper base overlay on steel substrate by TIG welding

Study on surface properties of coated WC-Co alloy based on laser reduction process