Abstract:A finite element computational methodology is presented for predicting the temperature distribution, fluid flow, and thermal stresses evolving in a solidifying ingot, which itself is growing in length, during the start-up phase of a continuous casting process, with a particular reference to aluminum casting. The approach is based on the coupling of a thermal and flow model with a stress model, The thermal flow model is developed using a deforming finite element method with an Eulerian-Lagrangian transformation to account for the fact that the ingot itself is also growing at a prescribed casting speed. The stress model is developed also by the finite element method, with mechanical deformations in the solidifying materials described by a hypoelastic-viscoplastic constitutive relation. The integrated model has been applied to study the dynamic development of temperature, flow, and stresses in the solidifying ingot during the start-up phase for continuous casting of aluminum. The results show that the fluid flow and temperature distribution experience a rapid change at the initial stage but that the change slows down later in the process as it approaches to the steady state. Computed results compare reasonably well with experimental measurements for temperature distributions in the ingot. It is found that the thermal stresses in general evolve from small to big in magnitude and from compressive to tensile in the solidifying ingot. The hoop stress is larger than other stress components, in particular in the outer surface region. The air gap formed between the ingot and the bottom block increases initially and decreases afterward as a result of stress relaxation.

Numerical Simulation of Temperature Field and Stress Field of High Strength Aluminum Alloys in Direct-chill Casting Ingot

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation and Machine Learning Prediction of the Direct Chill Casting Process of Large-Scale Aluminum Ingots

INTEGRATED FINITE ELEMENT MODEL FOR TRANSIENT FLUID FLOW AND THERMAL STRESSES DURING CONTINUOUS CASTING

Numerical simulation of melt flow and temperature field during DC casting 2024 aluminium alloy under different casting conditions

Domination and Effect of Multi-parameters in Direct Chill Casting based on Establishment of Thermo Model by Numerical Simulation and Experiment

Numerical Simulation of Influence of Vertical Continuous Casting Process Parameters on Heat Transfer and Mold Stress of C71500 Large Diameter Hollow Ingot

Simulation of Temperature Field and Microstructure in Heavy Steel Ingots Solidification

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Numerical modeling and simulation of water cooling-controlled solidification for aluminum alloy investment casting

Numerical Simulation of Temperature Field and Grain Structure in Cu-10Al Alloy Produced by Heated Mould Continuous Casting

Effect of temperature field on the porosity and mechanical properties of 2024 aluminum alloy prepared by direct chill casting with melt shearing

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

Numerical Simulation of Central Shrinkage Crack Formation in a 234-T Steel Ingot

Finite Element Modeling of Quenching Process of 2A12 Aluminum Block

Numerical Simulation of Thermal Stress of Shaped Casting Based on Rheological Model

Numerical simulation and experimental verification of the initial temperature distribution of castings during mold filling process

Role of conformation in π-π interactions and polymer/fullerene miscibility.

Numerical simulation of DC casting of large-size rare earth magnesium alloy ingot under low-frequency electromagnetic field

Numerical simulation of microstructure of aluminum alloy casting using macro-micro coupled method