Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Research on the Measurement of Hydrogen in Magnesium Melt

Hydrogen desorption properties of the MgH2-AlH3 composites

Investigation of catalytic modification of light magnesium based hydrogen storage material

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Theoretical and Experimental Research of Hydrogen Solid Solution in Mg and Mg-Al System

Research Status of Hydrogen Evolution during Magnesium Alloy′s Corrosion Process

Research Progress of Mg and Mg-Based Alloy Hydrogen Storage Materials

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Development of a System for Fast Measuring Hydrogen Content in Aluminum Alloy Melt Based on Dynamic Measurement of Hydrogen Partial Pressure

An Investigation on the Reaction Mechanism of LiAlH4–MgH2 Hydrogen Storage System

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Numerical Simulation on the Hydrogen Storage Performance of Magnesium Hydrogen Storage Reactors

Thermogravimetric Analysis of Hydrogen Production of Al–Mg–Li Particles and Water

Progress in improving hydrogen storage properties of Mg-based materials

Hydrogen Storage Properties of Magnesium Hydride with V-Based Additives

Recent Advances in the Preparation Methods of Magnesium-Based Hydrogen Storage Materials

Thermodynamic Destabilization Of Magnesium Hydride Using Mg-Based Solid Solution Alloys

Hydrolysis of Mg-based Alloys and Their Hydrides for Efficient Hydrogen Generation

Review on Hydrogen Storage Property and Preparation of Nanostructured Mg

Hydrogen Storage Performance of Mg/MgH2 and Its Improvement Measures: Research Progress and Trends