Abstract:The machining effects of hole drilling is limited by merely changing the amplitude. Adjusting ultrasonic vibration frequency to expand the matching range of machining parameters optimization is necessary to improve hole drilling effects. Therefore, the design, optimization, and experiment evaluation for a novel integrated, fined, low-cost dual-frequency ultrasonic tool shank is proposed, which can work in three vibration modes for micro-nano precision drilling. The principle of the dual-frequency ultrasonic transducer is introduced. The electro-mechanical equivalent circuit model with step horn is applied to study the dual-frequency characteristics. The transducer displacement equation model based on the wave equation theory is deduced to find the shared vibration node of the first and third frequency. Sensitivity analysis by equivalent circuit model and Finite element method (FEM) simulation of the key parameter is both conducted to optimize ultrasonic transducer geometry dimension. The vibration node of mounting flange is specified in an identical position for the dual vibration modes. A prototype of ultrasonic tool shank is fabricated and evaluated in experiments. It demonstrates that the dual working frequency of the ultrasonic transducer is 34.9 kHz and 104.5 kHz in the first and third mode resonant vibration, which is benefit to the low and high frequency drilling. Three working modes of the low, high, and coupling frequency vibration is measured by a self-developed ultrasonic generator. When 40 V voltage is excited, the vibration amplitudes of the low and high frequency are 17.8 μm, and 9.3 μm, respectively, which can meet with the drilling requirement. Moreover, the coupling vibration with the low and high mode are excited simultaneously, and the motion trajectory of the coupling vibration is observed in a "M" shape, which is a novel trajectory for the precision micro-nano drilling. Micro drilling experiments show that the 35 kHz ultrasonic vibration drilling can achieve better machining effect than conventional drilling (CD). The 105 kHz ultrasonic drilling outperforms the CD, 35 kHz and coupling ultrasonic drilling at cutting force reduction. The coupling ultrasonic vibration drilling achieves the lowest chipping diameter. It is to be noted that the 105 kHz-8 μm produce the fined smoothly surface. The 35 kHz, 105 kHz and coupling ultrasonic drilling can produce better surface micro morphology with less quantity and size of craters than that of CD.

Drilling Mechanism and Experimental Study on Ultrasonic Vibration Machining of 45 Steel

Dynamic chip formation of ultrasonic-assisted micro-drilling on AISI 4340 steel

Experimental investigation on cavitation effect and surface quality of ultrasonic-assisted micro-hole drilling

Study on Ultrasonic Driller for Microstructure Manufacture

Experimental Research on Optimizing Processing Parameters of Ultrasonic Polishing without Abrasive

Study on the mechanism of AL2024-T351/Ti-6Al-4V laminated materials by ultrasonic vibration drilling

Theoretical and experimental study on micro ultrasonic-assisted electrochemical drilling with high speed electrode

Study the Machining Accuracy in Hole Reaming of Medium Carbon Steel Using Ultrasonic Vibration Method

Effect of ultrasonic assisted EDM based on horizontal vibration on deep and small hole machining

Ultrasonic tool shank with multiple vibration mode for micro-nano drilling: Design, optimization and experiment

Study on the Simulation and Experiment of Ultrasonic-assisted Vibration Drilling of Ti6Al4V

Study on the surface integrity of micro-holes in high volume fraction SiCp/Al using ultrasonic vibration drilling

Experimental Research of High-Quality Drilling Based on Ultrasonic Vibration-Assisted Machining

Research on cutting force and surface integrity of TC18 titanium alloy by longitudinal ultrasonic vibration assisted milling

Experimental Study on Drilling Deep-small Hole by Using Axial Low-frequency Vibration Drilling Technique

Experimental Study on Ultrasonic-Assisted End Milling Forces in 2195 Aluminum-Lithium Alloy

Study on thrust force of ultrasonic-assisted vibration micro-hole drilling of titanium alloy

Study on tool wear in longitudinal-torsional composite ultrasonic vibration–assisted drilling of Ti-6Al-4V alloy

Improving Productivity in an Ultrasonic-Assisted Drilling Vertical Machining Center

Comparative study on drilling effect between conventional drilling and ultrasonic-assisted drilling of Ti-6Al-4V/Al2024-T351 laminated material