Abstract:Currently, the field of microgear manufacturing faces various processing challenges, particularly in terms of size reduction; these challenges increase the complexity and costs of manufacturing. In this study, a technique for microgear manufacturing is aimed at reducing subsequent processing steps and enhancing material utilization. This technique involves the use of trough dies with extrusion-cutting processing, which enables workpieces to undergo forming in a negative clearance state, thus reducing subsequent processing time for micro products. We conducted finite element simulations using microgear dies, measuring stress, velocity, and flow during the forming process of four types of dies-flat, internal-trough, external-trough, and double-trough dies. The results indicated that the buffering effect of the troughs reduced the rate of increase in the material's internal stress. In the cavity, the material experiences a significant increase in hydrostatic pressure, leading to the formation of a "hydrostatic pressure wall". This pressure barrier imposes substantial constraints on the flow of the material during dynamic processes, making it difficult for the material to move into the remaining areas. This effectively enhances the blockage of material flow, demonstrating the critical role of hydrostatic pressure in controlling material distribution and movement. In addition, combining the characteristics of both into a double-trough die enhances the overall stability of forming velocity, reduces forming load and energy consumption, and maximizes material utilization. Results further revealed that microgears manufactured using double-trough dies exhibited defect-free surfaces, with a dimensional error of less than 5 μm and tolerances ranging from IT5 to IT6. Overall, this study offers new insights into the traditional field of microgear manufacturing, highlighting potential solutions for the challenges encountered in current microstamping processes.

Design of Micro-blanking and Stamping Mold for Dish-shaped Parts

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Design of Injection Mould for Bowl

A Plate Stamping Mould Design

Research on 5A06 Aluminium Alloy Thin-wall Semisphere Hydromechanical Deep Drawing Process

The Stamping Method Utilizing a Double-Trough Die in Microforming to Enhance Formability

Fabrication of a Metal Micro Mold by Using Pulse Micro Electroforming

Demolding Defects and the Design of Demolding Device in Micro Hot Embossing Process

Design and Application of a Novel Cone-shaped Blank Holder for Precision Stamping Process

Manufacture of the Die of an Automobile Deck Part Based on Rapid Prototyping and Rapid Tooling Technology

Zinc-based alloy rapid tooling for sheet metal forming reinforced by SLM steel inlays

A New Metal-Forming Technique of Micro-Deep Drawing-Laser Dynamic Forming

Automobile Clutch Shell Shaping Technology and Mould Design

Research on Precision Blanking Process Design of Micro Gear Based on Piezoelectric Actuator

Research on Micro Array Holes Machining by Combined EDM with Stamping

Research on the Micro Sheet Stamping Process Using Plasticine as Soft Punch

Microforming technology and its mechanical characteristics

Microforming of Stainless Steel Miniature Pump by Additive Sheet-Manufacturing

Research on the Application of Injection Molding Simulation Technology in Mold Design

Numerical Simulation of Hot Stamping Forming of AZ Series Magnesium Alloys and Optimization of Die Process

Development of forming process for deep drawing of square cup with optimized blank holder pressure