Abstract:In the face of increasingly demanding service conditions for high-end bearings, the need for bearing steels that demonstrate superior mechanical properties, specifically a robust balance of strength and toughness, is growing. The adoption of near-net-shaped cold rolling methods has emerged as a leading international technology to enhance bearing performance. In this study, the effect mechanisms of pre-cold deformation on the phase transformation kinetics, microstructure evolution and mechanical properties of nano-bainite bearing steels are systematically studied. Results reveal that pre-cold deformation treatment effectively reduces the A(c1) temperature of the experimental steel, expedites nano-bainite transformation and promotes strong variant selection during bainite phase transformation. With the increase in pre-cold deformation from 0 % to 50 %, the size of the prior austenite grains decreases from 6.7 mu m to 3.3 mu m, and the size of carbides in specimens becomes more uniform, whilst the refinement of austenite grains can considerably reduce the thickness of bainitic ferrite plates. The decrease in grain size and the increase in V1-V2 variant pairs lead to an improvement in the toughness of the nano-bainite bearing steel from 64.9 J/cm2 to 114.3 J/cm2. A marginal increase in the hardness of the bearing steel is observed with the increase in pre-cold deformation. Furthermore, this study discusses the evolution mechanism of microstructure in the subsequent phase transformation by different microstructures in the early stage. Results show that pre-cold deformation leads to the transition of the martensite twin substructure in the specimens from {112} <111> twins to twinned variants. These insights offer critical understanding into the microstructural underpinning the enhanced performance of nano-bainite bearing steels subjected to pre-cold deformation treatment.

Application Progress of Bainite Steel in Bearings

Development of and Perspective on High-Performance Nanostructured Bainitic Bearing Steel

Performance of a Carburizing Bearing Steel After Surface Nanosized

Microstructures and Properties of a Novel Carburizing Nanobainitic Bearing Steel

Unleashing the Potential of Nano-Bainite Bearing Steels: Controllable Selection of Microstructure Evolution Enables Concurrent Improvement of Toughness and Hardness by Pre-Cold Deformation

Microstructures and Mechanical Properties of a Modified High-C–cr Bearing Steel with Nano-Scaled Bainite

Research and Application of Bainite Non-quenched Steel

Microstructural evolution and performance change of a carburized nanostructured bainitic bearing steel during rolling contact fatigue process

Research on bainite transformation in steels

The Development of Mn-Series Air-Cooled and Water-Quenched Bainitic Steels in China

An Overview on Bainite Formation in Steels

Effect of refined cementite on the microstructure and properties of nanostructured bainitic bearing steel

Prospect of air cooled bainitic steel

The mechanism of bainite transformation in steels

In-situ Observation of Phase Transformation During Heat Treatment Process of High-Carbon Bainitic Bearing Steel

Recent progress: bainite transformation in steels

Comparison on Wear Resistance of Nanostructured Bainitic Bearing Steel with and Without Residual Cementite

Microstructures and Mechanical Properties of Bearing Steels Modified for Preparing Nanostructured Bainite

Creation of Air-Cooled Mn Series Bainitie Steels

Effects of Preformed Martensite on Microstructure and Mechanical Properties of Nanobainite Bearing Steel

Review on Heat Treatment and Surface Modification Technology of High‐Strength Bainite Steels