Abstract:Accurately calculating the characteristics of impulse-dispersed currents in cross-river tower grounding devices is a fundamental work. This paper presents the dynamic model of impulse characteristics of grounding device considering the coupling of river seepage, water velocity and current dispersion. Firstly, a finite-element model is established for the flow field, taking into account the dynamic process of river seepage to surrounding soils, and which calculates the distribution of soil water saturation. Next, an electrical finite-element model is established to calculate the impulse-dispersed current process. To simulate the effects of river water seepage and soil ionization on soil parameters, a dynamic function for soil resistivity with changes in electric field strength and soil water saturation is suggested. The influence of water velocity on seepage was quantitatively simulated by Bernoulli's principle. Finally, based on the proposed method, a model for a representative tower grounding device located near a river is developed to analyze the impact of seepage and soil structure on soil resistivity, current density, and electric field strength distribution. The findings indicate that the seepage of river water into the surrounding soil significantly changes the soil's resistivity and its spatial distribution characteristics. Additionally, the dispersion current tends to dissipate in areas underneath the river, thus changing the distribution of electric field strength within the soil. The aquifuge has a significant impact on groundwater seepage. However, if the aquifuge is situated more than 90 m below the ground, its effect can be ignored. In contrast, soil structure without an aquifuge can closely approximate a vertically structured soil. In practical engineering, appropriate models should be selected based on the specific characteristics of the soil structure and water velocity to ensure the pre-work accuracy of lightning protection optimization design.

Study on measurement technology of impulse dispersing current in tower grounding device

Tower Impulse Grounding Resistance Measurement Based on Multiple Frequency Impedance

Experimental Analysis on Impulse Characteristics of Grounding Devices under High Lightning Current

Discussion of Measurement Methods of Impulse Grounding Impedance

Study on Evaluation Method of Impulse Dispersion Performance of Grounding Device Using X-ray Imagining System

Research on Lightning Current Shunting Characteristics Between Tower and Ground Wires Based on Field Test and Numerical Simulation

Research of Influence Pattern of Lightning Current on Impulse Characteristic of Ground Device for Pole and Tower

Laboratory Investigation of Impulse Characteristics of Transmission Tower Grounding Devices

Field test of grounding devices impacted by large impulse current

Lightning Impulse Impedance and Surface Potential Distribution of 10 kV Distribution Line Tower: Field Test and Simulation

Research Progress on Parameters Measurement of Air Gap Discharge

Research on Contrastive Analysis of Grounding Device Power Frequency and Impulse Characteristic

Instrumentation for Sub-Ampere Lightning Current Measurement on a Tall Meteorological Tower in Complex Electromagnetic Environment

Influence of Lightning Monitoring Device Position on Measured Lightning Current Parameters

Calculating Method of Impulse Characteristics of Tower Grounding Devices Considering Soil Ionization

Grounding Impedance Measurement Equipment for Lightning Protection System Maintenance

Non-Intrusive Measurement of Transient Electric Field Distribution Under AC and Impulse Voltages

Impulse performance of underground insulating wall near grounding device under lightning strike

Dynamic modeling of grounding device impact characteristics considering coupling of river seepage, water velocity and current dispersion

Influence of Transmission Tower on Measured Lightning Currents

Novel Measurement System for Grounding Impedance of Substation