Abstract:High efficiency and wide stability at variable speeds are equally important to the design and operation of multistage axial flow compressors. However, published research works on three-dimensional design optimization of compressors are so far mainly limited to a single blade row or stage at design speed due to the curse of dimensionality. Moreover, optimization of variable inlet guide vanes (IGV)/stators for off-design operations is carried out by using a rapid but low-fidelity prediction tool and is generally independent of design optimization of blade geometry. To tackle these issues, a three-dimensional holistic design and adjustment optimization method is developed in which both three-dimensional blade geometry and variable IGV/stators are optimized simultaneously for better efficiency and stability at design and off-design conditions. Metamodel-interpreted data mining method and adaptive infilling strategy are used respectively to enhance the capability of the metamodeling and optimization. The developed method is then applied to a modern highly loaded 3.5-stage transonic axial flow compressor at both design and part-design speeds. The results show that the stall margin is extended from 8.23% to 19.65% at 70% design speed while peak efficiency is slightly improved at design speed. The flow mechanisms responsible for the efficiency enhancement at design speed are mainly associated with the reduced total pressure loss in stators as well as inter- and intra-stage loading redistribution. The stability enhancement at 70% design speed is mainly achieved by loading the front blade rows while unloading the limiting rear blade row through variable IGV/stators adjustment. The developed holistic design and adjustment optimization method with the aid of metamodel-interpreted data mining is of great application value for the design and adjustment of advanced multistage axial flow compressors.

Aerodynamic Preliminary Design Optimization of Ten-stage High Pressure Compressor

A throughflow-based optimization method for multi-stage axial compressor

Aerodynamic Design Optimization Of The Last Stage Of A Multi-Stage Compressor By Using An Adjoint Method

Three-Dimensional Aerodynamic Optimization of a Multi-Stage Axial Compressor

Aerodynamic optimization design of a single stage compressor

Development of a Multi-Objective Preliminary Design Optimization Approach for Axial Flow Compressors

Design Optimization of the Last Stage of a 4.5-Stage Compressor Using a POD-based Hybrid Model

Optimization of Three-Dimensional Blade and Variable Stators for Efficiency and Stability Enhancement of Multistage Axial Flow Compressor at Variable Speeds

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Optimization of a Centrifugal Impeller with the Constraint on Efficiency at the Stall Point

Design Optimization of Multi-Stage Axial-Flow Compressor Using Machine Learning Models

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Optimization of cantilevered stators in an industrial multistage compressor to improve efficiency

Study On Aerodynamic Redesign Of A High Pressure Ratio Centrifugal Compressor

Three-Dimensional Multi-Objective Design Optimization of a 6.5-Stage Axial Flow Compressor Blades With Lean and Twist

Preliminary Optimization of Multi-Stage Axial-Flow Industrial Process Compressors Using Aero-Engine Compressor Design Strategy

Aerodynamic Design and Optimization of Zero-stage for a 13-stage Axial-flow Gas Compressor

Aerodynamic Analysis of a Highly Loaded 5-Stage Axial Compressor

Design optimization of transonic compressor stage using CFD and response surface model

Numerical Optimization for Stator Vane Settings of Multi-Stage Compressors Based on Neural Networks and Genetic Algorithms