Abstract:Multiphase pump is a cost-effective option for subsea gas and oil fields development. The ability of handling different gas volume fractions with high rotational speed is necessary to optimize the operating performance of a multiphase pump. Thus meeting the demand for increasing gas and oil production of undersea wells especially for those brownfields. This study aims to validate the performance of a three-stage helico-axial multiphase pump with new designed impellers and high rotational speed in both single and two-phase experiments. Then establish a numerical analysis method to predict the pump performance and evaluate the characteristics of multiphase flow with high reliability by using commercial CFD packages. The design volume flowrate of the pump is 100 m(3)/h and rotational speed is 4500 rpm. The experiment results show that the highest efficiency is 45% in water condition at the design parameters. There is not much difference on the pump performance at low inlet gas volume fractions (GVF) such as 5% and 10%, which indicates that multi-stage pump can prevent large performance degradation at low inlet GVFs. Numerical simulations are implemented by solving the three-dimensional steady Reynolds-Averaged Navier-Stokes (RANS) equations. The effects of various turbulence models, wall roughness, gas bubble sizes and interphase drag models on the hydraulic performance of multiphase are investigated. The results show that the predicted performance with Shear Stress Transport (SST) turbulence model at the optimal conditions agree well with the experiment data. Wall roughness should be considered since it has a significant effect on pump efficiency. Gas bubble size varies according to different inlet GVFs and rotational speed. The in-situ alpha(g) is high in diffuser and it varies with different interphase drag force models. The reliability of the numerical analysis method is proven by comparing the numerical results and experiments data.

Optimization Research on Structure of Synchronal Rotary Multiphase Pumps

Design and Torque Optimization of Single-phase Hybrid Switched Reluctance Motors

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Working Principle and Dynamic Characteristics of a Synchronal Rotary Multiphase Pump

Frictional Loss Studies and Experimental Performance of a New Synchronal Rotary Multiphase Pump

Theoretical and Experimental Study of A Synchronal Rotary Multiphase Pump at Very High Inlet Gas Volume Fractions

The Optimization of A Low Specific Speed Pipeline Pump

Optimization Design for an Impeller of the Multiphase Rotodynamic Pump Handling Gas-Liquid Two-Phase Flow

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Multi-Point Optimization on the Diffuser of an Axial Flow Pump

Optimization Design of Progressive Cavity Pumps via Finite Element Simulations with a Fluid-Solid Interaction Model

Experiment and Numerical Study of a New Generation Three-Stage Multiphase Pump

Performance Research and Structure Optimization of Labyrinth Screw Pump

Theoretical and Experimental Performance Analysis of a Synchronal Rotary Multiphase Pump with the Inlet Gas Volume Fractions of 0–0.9

Research on the Rotational Inertia of Radial Piston Pump and the Optimization Method of the Pump Parameters

Optimization design method of multi-stage multiphase pump based on Oseen vortex

Modeling and Optimization of the Blade Structural Parameters for a Turbomolecular Pump

Structure optimization design of extracorporeal circulation blood transport pump

Research on Optimal Design of Double Stator Low-speed High-torque Synchronous Motor Based on Surrogate Model

Transportability Improvement of a Gas–Liquid Rotodynamic Pump Using the Two-Step Multi-Objective Optimization Strategy