Optimization Calculation Method for Efficiency of Multistage Split Case Centrifugal Pump

Shui-guang TONG,Hang ZHAO,Hui-qin LIU,Zhe-ming TONG,Yue YU,Ning TANG,Wei-jie WU,Jin-fu LI,Fei-yun CONG,Hao ZHANG,Yin-hua WANG,Guo-shuai HAO

DOI: https://doi.org/10.3785/j.issn.1008-973x.2019.05.021

2019-01-01

Abstract:The optimization calculation method of the hydraulic efficiency and the relative width of high efficient area for centrifugal pumps was researched. The multi-objective optimization calculation method of the approximate models was proposed based on the hydraulic loss model. Optimization design of multi-stage dual split centrifugal pump was conducted as an example. The key design variables were selected out through sensitivity analysis based on the hydraulic loss model. The hydraulic loss model, the complete quadratic response surface function (RSF) model, the radial basis Gaussian response surface function (RBF) model and the Kriging response surface function (KRG) model were used respectively to optimize the key design variables of centrifugal pumps. The accuracy and efficiency of the four methods were analyzed as well. Results showed that the calculation time of the first optimization method based on the theoretical formula was the shortest, but the error was big. The latter three optimization methods were based on the computational fluid dynamics (CFD) numerical simulation analysis and the results were accurate. The results of RSF model were the most accurate and the calculation time was short. The calculation results of RSF was the most accurate, followed by that of RBF, and the worst was that of KRG by the comparison of the calculation accuracies of the three approximate models. The Pareto optimal solution based on RSF had the head of 83.77 m and the efficiency of 77.26% with the design flow. The Pareto optimal solution based on RBF had the head of 83.09 m and the efficiency of 76.63% with the design flow.