Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

Research on Optimal Design of Double Stator Low-speed High-torque Synchronous Motor Based on Surrogate Model

Design and Torque Optimization of Single-phase Hybrid Switched Reluctance Motors

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Modeling and Optimal Design of the Rotary-Linear Type Two-Degree-of-Freedom Ultrasonic Motors

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

Optimization Design of Dual‐Parallel Rotor Permanent Magnet Motor Based on Dynamic Kriging Surrogate Model

Multi-objective optimization design of external rotor permanent magnet synchronous motor for robot arm

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Optimization research of stator with two degree-of-freedom traveling-wave spherical ultrasonic motor

Multi Objective Optimization of Permanent Magnet Synchronous Motor Based on Taguchi Method and PSO Algorithm

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Rotor Multidisciplinary Optimization of High Speed PMSM based on Multi-fidelity Surrogate Model and Gradient Sequential Sampling

Multi-Objective Optimization Design of a Stator Coreless Multidisc Axial Flux Permanent Magnet Motor

Multi-objective Optimization Design of Hybrid Excitation Double Stator Permanent Magnet Synchronous Machine

Optimal Design of the Stator of the Cylinder-sphere Ultrasonic Motor with Multi-degree of Freedom

Technology-Oriented Synchronous Optimal Design of a 4-Degrees-of-freedom High-Speed Parallel Robot

A Novel Rapid Optimization Design Method for the Reverse-salient Permanent Magnet Synchronous Motor

A computationally efficient surrogate model based robust optimization for permanent magnet synchronous machines

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

Optimization Design of Permanent Magnet Synchronous Motor Based on Multi-Objective Artificial Hummingbird Algorithm