Abstract:Structures’ ultimate strength has been increasingly valued in the past few decades. The model test is an important and reliable way to estimate the ultimate strength. For large and complex structures, like ship hull structures, the test subject is usually scale models due to the limitation of loading capacity and space of laboratories. Therefore, the similarity method and the design of scale models are of great importance. The stiffened plate is the minimum unit that makes up thin-walled structures. The similarity method of the ultimate strength of stiffened plates is the base of the similarity method of large and complex structures. This paper is a further study of an existing similarity method proposed in our previous work. A stiffened plate from a real ship is taken as the subject. 22 combinations of scale ratios are used to design scale models. The 23 models (including the original model) are subjected to a combined load of longitudinal compression and lateral pressure. The non-linear finite element method is used to analyze these models. The results revealed that the previous method is only suitable for scale models with small degrees of geometrical distortion. It didn't consider the effect of geometrical distortions. An improved similarity method and scale model design method are proposed to solve these problems. The improved methods consider the geometrical distortion of scale models and are applicable to more geometrically distorted scale models. More numerical examples are performed to verify the correctness and advantage of the improved methods.

Analysis and optimum design on the stress concentration of long deckhouse end

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

Optimum Design of Strengthened Ring Plates Around the Rectangular Opening on Ship Decks

Optimization Analysis for the Typical Details of Ship Structures

Design Approach of Stiffeners in Extended End Plate Connections and Finite Element Analysis

Analysis and Photoelastic Test on the Stress Concentration of Superstructure End and Broadside with Large Opening

Design and Analysis of a Novel Ship Pipeline Welding Auxiliary Device

Multi Load-Transmitting Device Based Support Layout Optimization for Large Fuselage Panels in Digital Assembly

Optimization Analysis On The Structure Parameters Of A 20x10(4)M(3) Ultra-Large Tank For Crude Oil Storage

Analysis and optimization of pre-stressed modal features of ship anchor support parts

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Fixture Layout Optimization for the Curved Shell Plate in the Shipbuilding Industry

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Stress distribution of orthotropic steel bridge decks under vehicle wheel loading

Numerical Investigation of Three-Dimensional Hull Girder Ultimate Strength Envelope for an Ultra Large Container Ship

Stress state analysis and symmetrical optimization of double-row non-symmetrical arrangement of anchorage slot in concrete lining structure

The Finite Element Analysis of the End Anchorage under Larger Prestressing Load in Rehabilitation Engineering

An Improved Similarity Method for Stiffened Plates Subjected to Combined Loads of Longitudinal Compression and Lateral Pressure

Structure design and strength evaluation of container ship cargo area

Optimum Design of Midship Section of Container Ships in View of Crankle Strength and Frequency Constraints

Optimal Design of Fixture Layout for Compliant Part with Application in Ship Curved Panel Assembly