Abstract:The safety of explosives is closely related to the stress state of the explosives. Under some stress stimulation, explosives may detonate abnormally. It is of great significance to accurately describe the mechanical response of explosives for the safety evaluation of explosives. The mechanical properties of polymer bonded explosives (PBXs) strongly depend on pressure. In this study, the mechanical behaviour of PBXs under confined conditions was investigated. It was found that the stress-plastic strain response of a PBX under high confining pressures is a combination of the non-linear and linear hardening portions. However, the linear hardening portion has often been neglected in characterizing the mechanical behaviour of a PBX under such pressures. The Karagozian and Case (K&C) model was applied to characterize the mechanical behaviour of PBXs. The numerical results demonstrated that when the confining pressure was high, the K&C model could not adequately match the experimental data due to the limitation of the damage model. Therefore, a new damage model was developed by means of considering intragranular damage and transgranular damage. This modification made it possible to introduce a linear hardening process into the original K&C model. The method proposed to describe the stress-strain results under high confining pressures was to consider the stress-plastic sa din curve, including the nonlinear and linear hardening portions. The damage evolution of the original K&C model and a linear hardening model were applied for the nonlinear and linear hardening portions respectively. The influence of the linear hardening model on the damage evolution of the original K&C model was included when describing the nonlinear hardening portion. A comparison between simulation and experiment showed that the modified K&C model could well describe the mechanical response of PBXs under different confining pressures.

Influence Rule of Quasi-isentropic Loading Characteristics on the Initiation of PBXC03 Explosive

Numerical Research on Initiation of PBXC03 Explosives under Quasi‐Isentropic Loadings

Initiation and Detonation Growth Characteristics of Polymer Bonded Explosives under Ramp-Wave Loadings

A Modified Mesoscopic Reaction Rate Model for Shock Initiation of PBXs

Experimental and Numerical Study on the Shock Initiation of PBXC03 Explosive under the Different Loading Pressure

Mesoscopic Effects on Shock Initiation of Multi-Component Plastic Bonded Explosives

A Systematic Method to Determine and Test the Ignition and Growth Reactive Flow Model Parameters of a Newly Designed Polymer‐Bonded Explosive

Embedded Manganin Gauge Measurements and Modeling of Shock Initiation in HMX‐Based PBX Explosives with Different Particle Sizes and Porosities

Experimental research on effects of porosity on shock initiation of PBX explosive

Shock Initiation of Multi-Component Insensitive PBX Explosives: Experiments and MC-DZK Mesoscopic Reaction Rate Model.

Study on new reaction rate function model of PBX-9404 for damaged explosive initiation behaviour

Numerical Analysis of the Damage and Failure Behavior of Polymer-Bonded Explosives Using Discrete Element Method

An Elastic/Viscoplastic Pore Collapse Model of Double-Layered Hollow Sphere for Hot-Spot Ignition in Shocked Explosives

Effects of HMX Particle Size on the Shock Initiation of PBXC03 Explosive

A Pressure-Dependent Plasticity Model for Polymer Bonded Explosives under Confined Conditions

Multiscale Modeling for Dynamic Compressive Behavior of Polymer Bonded Explosives

A Mesoscopic Reaction Rate Model for Shock Initiation of Multi-Component Pbx Explosives

Dynamic Mechanical Damage and Non-Shock Initiation of a New Polymer Bonded Explosive During Penetration

A multi-component Duan-Zhang-Kim mesoscopic reaction rate model for shock initiation of multi-component PBX explosives

A Pore Collapse Model for Hot-spot Ignition in Shocked Multi-component Explosives

Mechanical Behavior of a Typical Polymer Bonded Explosive under Compressive Loads