Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Study on new reaction rate function model of PBX-9404 for damaged explosive initiation behaviour

Anisotropic Dynamic Damage and Fragmentation of Rock Materials under Explosive Loading

A new Ignition-Growth reaction rate model for shock initiation

Meso-Simulation and Experimental Research on the Mechanical Behavior of an Energetic Explosive

Experimental analysis and multi-scale simulation of the fracture behavior of polymer-bonded explosives based on the dynamic notched semi-circular bend method

Dynamic damage and non‐shock ignition behavior of polymer bonded explosive under lower velocity impact

A viscoelastic–viscoplastic constitutive model for polymer bonded explosives under low impact loading

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

The Dynamic Mechanical Behaviour and the Statistical Crack Mechanics Model for a Polymer-bonded Explosive

The Pore Collapse "Hot-Spots'' Model Coupled with Brittle Damage for Solid Explosives

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

Numerical simulation of multi‐layer flyer impact initiation of a certain PBX explosive

Experimental and Numerical Investigation of Dynamic Damage and Load Transfer of PBX Substitute Material under Low Velocity Impact

Multi-scale modeling of shock initiation of a pressed energetic material III: Effect of Arrhenius chemical kinetic rates on macro-scale shock sensitivity

Simulation of high explosive explosion using adaptive material point method

Peridynamics simulations of the damage of reinforced concrete structures under radial blasting

A model for hot spot formation in shocked energetic materials

Modelling on Shock-Induced Energy Release Behavior of Reactive Materials considering Mechanical-Thermal-Chemical Coupled Effect

Numerical simulation study on the slow cook-off response characteristics of PBX explosive

Quantitative prediction and ranking of the shock sensitivity of explosives via reactive molecular dynamics simulations