Abstract:The mechanical behavior of a commercially pure titanium (CP-Ti) is systematically investigated in quasi-static (Instron, servohydraulic) and dynamic (UCSD's recovery Hopkinson) compression. Strains over 40% are achieved in these tests over a temperature range of 77–1000K and strain rates of 10−3–8000/s. At the macroscopic level, the flow stress of CP-Ti, within the plastic deformation regime, is strongly dependent on the temperature and strain rate, and displays complex variations with strain, strain rate, and temperature. In particular, there is a three-stage deformation pattern at a temperature range from 296 to 800K, the specific range depending on the strain rate. In an effort to understand the underlying mechanisms, a number of interrupted tests involving temperature jumps are performed, and the resulting microstructures are characterized using an optical microscope. Based on the experimental results and simple estimates, it is concluded that the three-stage pattern of deformation at temperatures from 296 to 800K, is a result of dynamic strain aging, through the directional diffusion of dislocation-core point defects with the moving dislocation at high strain rates, although the usual dynamic strain aging by point defects segregating outside the dislocation core through volume diffusion is also observed at low strain rates and high temperatures. The microscopic analysis shows that there is substantial deformation twinning which cannot be neglected in modeling the plastic flow of CP-Ti. The density of twins increases markedly with increasing strain rate, strain, and decreasing temperature. Twin intersections occur, and become more pronounced at low temperatures or high strain rates. In sum, the true stress–true strain curves of CP-Ti show two stages of deformation pattern at low temperatures, three stages at temperatures above 296K, and only one stage at temperatures exceeding 800K, although all three stages may exist even at 1000K for very high strain rates, e.g. 8000/s. While the dislocation motion is still the main deformation mechanism for plastic flow, the experimental results suggest that dynamic strain aging should be taken into account, as well as the effect of deformation twinning.

Experimental Research on Dynamic Mechanical Behavior of TC18 Titanium Alloy under Medium and High Strain Rates

An Investigation of Dynamic Mechanical Behaviour of Ti6al4v Titanium Alloy at Room Temperature

Study on Dynamic Compressive Mechanics Behavior of TC17 Titanium Alloy at High Temperature and High Strain Rates

Mechanical properties and deformation mechanisms of a commercially pure titanium

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Research on Dynamic Compression Properties and Deformation Mechanism of Ti6321 Titanium Alloy

High-strain-rate Plastic Deformation and Fracture Behaviour of Ti-5Al-5Mo-5V-1Cr-1Fe Titanium Alloy at Room Temperature

Study on Dynamic Mechanical Response of TC21 Alloy

The Mechanical Response and Failure Mechanism of a Near Α Titanium Alloy under High-Strain-rate Compression at Different Temperatures

High Strain Rate Compression Behavior of a Heavily Stabilized Beta Titanium Alloy: Kink Deformation and Adiabatic Shearing

Experimental Study on Tension Behavior of Pure Titanium at High Strain Rates

Study on the dynamic behavior of tungsten alloy at strain rates up to 5000 s-1

Flow Behavior and Dynamic Transformation of Bimodal TC17 Titanium Alloy During High Strain Rate Hot Compression

Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions

Mechanical Response and Deformation Mechanisms of TB17 Titanium Alloy at High Strain Rates

High-entropy CoCrFeMnNi Alloy Subjected to High-Strain-rate Compressive Deformation

Dynamic Strain-Rate Effect On Uniaxial Tension Deformation Of Ti5al2.5sn Alpha-Titanium Alloy At Various Temperatures

Dynamic Mechanical Behavior and Modified Johnson-Cook Model of Ti60 Alloy under High-temperature and High-strain-rate Conditions

High temperature mechanical properties of TiC particle reinforced titanium composites

Experimental Study on Dynamic Mechanical Properties of Ultrahigh Strength 30crmnsini2a Steel

Deformation Behavior of Ti-6Al-3Nb-2Zr-1Mo Titanium Alloy at Low Temperatures and High Strain Rates