Abstract:Methane (CH4) is an environmental-friendly fuel with a wide range of applications. The explosion and detonation hazards with respect to methane in tubes with different shapes should be paid in special attention. In this study, experiments were performed to investigate the propagation characteristics of detonation waves in annular channels with convergent cross-sections in stoichiometric methane-oxygen mixture at sub-atmospherical pressures (10 kPa-40 kPa). The annular channels with convergent cross-sections were assembled by inserting 0.5-m long cones into a 48-mm circular tube. Three conicities (<math>dend/L</math>) were employed, i.e., <math>dend/L</math> = 0.048, 0.072, 0.096, in which <math>dend</math> and <math>L</math> represent the bottom diameter and the length of the cone, respectively. The detonation velocity was obtained based on the time of arrival of the wave front. Smoked foils were used to register the detonation cellular evolution in the annular channels. The results show that the convergence of the channel has a great impact on the detonation velocity and cell sizes. Depending on the conicity, the detonation velocity and cellular structure exhibit different behaviors. For the smallest conicity, the continuous velocity deficit can be observed after detonation propagating into the annular tube. However, the characteristic of detonation velocity evolution shows distinct with the increase of the conicity, which is governed by the chemical scale (the detonation cell size) as well as the physical geometry (the channel width). The interaction between Mach reflection, boundary layer effect and the wall can be served as the dominating reason for the velocity behavior.

Detonation Velocity and Critical Diameter Testing Method for Explosive Based on Pressure-conduct Probe Design

Probability Distribution and Determination of Blast Loading During Structural Blast Resistant Study

Probe Cylinder Test Method and Calibration of JWL Equation of State of Detonation Products for TNT Explosive

Method of Determining the Critical Impact Velocity of Energetic Devices

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Experimental study on the propagation characteristics of detonation wave in annular channels with convergent cross-sections

Scaled Experiment of the Detonation Control System for the High-Speed Penetration on Concrete

Measurement of Dynamic Fracture Parameters of Explosive Cylindrical Shells

Effect of Porous Wall on Detonation Propagation Velocity in Hydrogen-Oxygen Mixtures

Experimental study on initiation and propagation behavior of propane/oxygen/nitrogen detonation wave

Experimental Research of the Performance and Pressure Gain in Continuous Detonation Engines with Aerospike Nozzles

Test to Determine the Response Level of Heterogeneous Explosive by Fragment Shock Initiation

Study on evaluation method for driving fragment ability of explosives

Experiment and instantaneous driving simulation of explosion dispersion process of central tube for submunition

Influence of diaphragm properties on shock wave transmission

Radial Pressure Characteristics on Borehole Walls at Decoupled Charge Blasting

Evaluation of the Explosion Pressure Parameters in Flameproof Enclosures under the Pressure Piling Condition

Experimental investigation on gaseous detonation propagation through a heart-shape tube

Measurement of Dynamic Fracture Parameters in the Expansion Process at High Strain Rate

Study on Forming Law and Penetration of a Spherical Cone Composite Structure Liner Based on the Explosion Pressure-Coupling Constraint Principle

Experimental research on detonation initiation and transition in millimeter-scale planar combustion chambers