Abstract:The control and data acquisition systems for high energy physics (HEP) applications require a suitable hardware platform to ensure system availability and reliability, so the micro telecommunications computing architecture (MicroTCA) standard is widely utilized in the field of HEP. As a fundamental component of the MicroTCA system, the advanced mezzanine card (AMC) requires efficient module management controller (MMC) to perform board monitoring and management. Therefore, the real-time responsiveness of the module management controller is crucial. Presently, most existing MMC solutions implemented on microcontroller chips with commercial architecture cores such as AVR and ARM. The open-source and customizable RISC-V instruction set architecture has gained widespread attention and adoption due to its advantages such as simplicity, modularity, scalability, low power consumption, and efficiency. In this study, we successfully implemented a MMC solution based on the RISC-V core microcontroller GD32VF103, and evaluated the real-time performance of MMC on both the GD32VF103 and the ARM-based STM32F100 through hot swap response time testing. The results reveal real-time performance of the firmware on the GD32VF103 chip compared to the STM32F100 chip, exhibiting a notable speed improvement of approximately 61.4%. Thus, RISC-V architecture chips exhibit significant potential as MMC solutions within MicroTCA systems.

The Theory and Implementation of MMC/SD Card Based on Embedded Linux

Development of Flash Memory Device Drivers in the Embedded Linux

Design and Create Saving Data Base on Embedded System

Research on Embedded Linux Operating System

SSC&#x2122; - A New Generation of Smart Controller for Mobile Storage

Design for Card Reader's Data Acquisition System Based on USBHID and SQLite of WINCE

Application on the Multi-file System in Embedded Devices

Read/Write MMC Card Based on SPI Protocol

Design and Implementation of IC Card I/O Interface in Embedded Systems

Implementation and performance comparison of MMC firmware on RISC-V and ARM-based MCUs

High Speed Large Capacity Storage and Reliability Enhancement for Embedded Multi-Core Platform

Building the JFFS2 File System under Μclinux

File System Design for Memory in CompactFlash Card on Microprocessor Based on ARM7TDMI

Application of MCU Interface with Floppy Disk Driver in Computerised Embroidery Machine

The Implementation of Large-Page NAND Flash Storage System in Windows CE Environment

A Novel Compatible Hardware Expansion Method Based on General Memory Interface

Realization and evaluation for data storage function of Micro SD cards based on MSP430

Implementation of FAT32 file system on embedded system

AN AUTOMATIC PARTITIONING AND UPDATING SYSTEM FOR FLASH MEMORY IN THE EMBEDDED LINUX

STUDY AND IMPROVEMENT OF EMBEDDED OPERATING SYSTEM MEMORY MANAGEMENT MECHANISM

Case of study for in situ memory reading on damaged MultiMedia Card