Effects of Bowed Blade Design on Water Erosion and Movement of Secondary Water Droplets

Hong YAO,Xun ZHOU,Xiaojun YU,Zhongqi WANG

DOI: https://doi.org/10.3969/j.issn.1674-7607.2017.10.006

2017-01-01

Abstract:To reduce the erosion damage over last stage blades of industrial steam turbines caused by water droplets,an active control method was developed based on the liquid-steam two-phase flow to study the movement characteristics of secondary water droplets and the water droplet erosion.By comparing the effects of stator blades in different bendings on the movement characteristics of secondary water droplets,the influencing mechanism was obtained,thus proposing the method to use bowed blades to control the impact range and intensity of secondary water droplets.Results show that a negatively bowed stator blade can reduce the speed of secondary water droplets in the mid span of the blade,which is also effective on the movement of water droplets on the stator surface;the negatively bowed stator blade improves the speed of secondary water droplets on endwalls of the stator,which is beneficial to the secondary droplets passing through the rotor blade passage,and to the reduction of secondary droplets impulse on the rotor blade;the negatively bowed stator blade can greatly reduce the degree of water erosion at the top of rotor blade on the suction side by changing the velocity distribution of secondary water droplets;a bowed stator blade with25° angle can reduce the high erosion area at the top of rotor blade by more than 90％.