Abstract:A new selective catalytic reduction (SCR) system for captive power plants in the petrochemical industry was analyzed. The key components suitable for the target SCR system were obtained using computational fluid dynamics (CFD) numerical simulation combined with a cold physical model. The structural characteristics of the SCR system were studied, and corresponding design schemes were obtained for the key components, such as the guide plate, the ammonia injection grid (AIG), the static mixer, and the rectifier grille. The distributions of the flue gas velocity and the NH3 concentration within the flue cross-section in front of the first layer catalyst were studied in detail. Synchronously, the pressure loss and the temperature reduction characteristics in the SCR system were also considered. CFD results showed that the average standard deviation of the flue gas velocity was about 11.61%, and the average standard deviation of the NH3 concentration distribution could reach about 3.79% under the five operating conditions. It could be concluded that the uniformity of the flue gas velocity and the NH3 concentration distribution within the above flue cross-section was guaranteed by comparing to the design standard of 15% and 5%, respectively. It was further found that the maximum pressure loss between the inlet and the first layer catalyst was about 106.64 Pa, and the temperature reduction characteristic of the entire SCR system could be maintained within ±0.01 °C, which indicated that no extreme adverse effect arose due to the introduce of the key components. The cold physical model experiment was accordingly conducted to verify the reliability of the above CFD results. The cold physical model experiment results showed that the average standard deviation of flue gas velocity was about 8.82%, and the average standard deviation of NH3 concentration distribution could reach about 4.21%. The maximum biases for the standard deviations of the flue gas velocity and the NH3 concentration distribution were approximately 4.83% and 1.18% under the five operating conditions. Based on the good agreement of the research results via the two different methods, the designed key components of a new SCR system could be confirmed to be feasible, which would benefit the deNOx performance of the SCR system.

Structural Design Essentials of Large and High Temperature Selective Catalytic Reduction Reactors

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Coordinated Optimization Control of Flue Gas Temperature for Improving Reaction Efficiency of Catalyst

Design and Verification of Key Components of a New Selective Catalytic Reduction System in a Petrochemical Captive Power Plant

Investigating the Optimization Design of Internal Flow Fields Using a Selective Catalytic Reduction Device and Computational Fluid Dynamics

Optimal design of a SCR-DeNOx system for a 300MW coal-fired power plant

Numerical Simulation on Optimization of SCR Denitrification System for Coal-fired Boilers

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Compact Research for Maritime Selective Catalytic Reduction Reactor Based on Response Surface Methodology

A Novel Design for Reduction of Ammonium Bisulfate Deposition in the Rotary Air Preheater

MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT

CFD analysis of influencing factors on SCR denitration efficiency of sintering flue gas based on response surface methodology

Optimal Design of a Tower Type SCR-deNO(x) Facility for a 1000 MW Coal-Fired Power Plant Based on CFD Simulation and FMT Validation

Structure-resolved CFD Simulations to Guide Catalyst Packing of Selective NO Reduction

Designing Character of Selective Catalytic Reduction Denitrification Device of Yuhuan Power Plant with 1 000 MW Units

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Theory and Practice of Metal Oxide Catalyst Design for the Selective Catalytic Reduction of NOx with NH3

Influence of Urea-SCR System Parameters on NOx Conversion Rate and Liquid Film

Review on Advances in Structure-Activity Relationship, Reaction & Deactivation Mechanism and Rational Improving Design of Selective Catalytic Reduction Denox Catalysts: Challenges and Opportunities

Influence of Catalyst Structural Remodelling on The Performance of NH3 ‐SCR Reactions: A Mini Review