Abstract:To predict the particle dispersion in the burner jet is of great importance in industrial application and in the designing of coal burner with good performance. The objective of this study was to numerically investigate the particle dispersion mechanisms in the gas–solid two-phase jet from a fuel rich/lean burner. The detached-eddy-simulation (DES) approach was employed to study the turbulent flow in the fuel rich/lean separator and the gas–solid multiphase jet from the exit of a fuel rich/lean burner. The vortex shedding process was simulated and its effect on the fuel rich/lean separating performance was evaluated. Combined with the Lagrangian tracking procedure for the particle phase, the coal particles with various Stokes numbers equal to 0.000434, 0.043, 1.08, 4.34 (corresponding to particle diameter 1, 10, 50, 100μm, respectively) in the gas–solid fuel rich/lean jet were studied, which shows that although there are coherent vortex structures behind the central partition plate, these vorticities are small, the fuel-rich stream and the fuel lean stream will not mix quickly downstream of the exit of the nozzle. The large vortex structures at the jet outer boundary are the main factors that make the small particles to mix together. The coal particles with large Stokes number (St>1) disperse very slowly in the jet flow, which realizes the fuel rich/lean combustion in a rather long distance downstream the exit of the nozzle, resulting in low NOx emissions.

Research on Separation Characteristics and Resistance Characteristics of Two-Phase Flow in Rich Lean Burner

STUDY ON SEPARATION AND RESISTANCE PROPERTIES OF VENTURI RICH/ LEAN PULVERIZED COAL BURNERS

TEST STUDY ON OUTLET FLOW FIELD PERFORMANCE FROM WAVE-SHAPED COMBUSTION-STABILIZING BODY OF THE CONCENTRATION TUNABLE RICH/LEAN BURNERS

A SIMULATION STUDY ON THE SEPARATING PERFORMANCE OF AN IMPACT TYPE FUEL RICH-LEAN BURNER AFFECTED BY THE ELBOWS

Numerical Simulation on the Rich/Lean Pulverized Coal Burner

THE DIFFUSION CHARACTERISTICS OF THE HORIZONTAL FUEL RICH-LEAN GAS-SOLID BURNER FLOW

Experimental and Numerical Study of a Two-Stage Swirl Burner

Characterization on Ignition and Volatile Combustion of Dispersed Coal Particle Streams: in Situ Diagnostics and Transient Modeling

THE NUMERICAL INVESTIGATION ON THE TRANSIENT CHARACTERISTICS OF THE GAS-SOLID TWO-PHASE FUEL RICH-LEAN BURNER FLOW

Experimental investigations on performance of collision-block-type fuel-rich/lean burner: Influence of solid concentration

Numerical Simulating for the Swirling Jet Two-Phase Flow from Pulverized Coal Rich/Lean Burner

Numerical Simulation for Gas-solid Two-phase Flow in New Type Rich-lean Steady Burner

Experimental study on cold two-phase flow in swirl burner exit

STUDIES ON THE GAS-SOLID FLOW RESISTANCE CHARACTERISTICS OF PULVERIZED COAL RICH/LEAN SEPARATOR IN HORIZONTAL STRAIGHT RING-PIPE

Diffusion Characteristics of Colliding Rich-Lean Gas-Solid Two-Phase Flows

DEM–CFD Simulation of the Particle Dispersion in a Gas–solid Two-Phase Flow for a Fuel-Rich/lean Burner

Numerical Simulation of the Effects of Block Height on the Gas−Solid Flow in a Fuel-Rich/Lean Burner by the Hard-Sphere Model

E207 USING LIGHT FLUCTURATION METHOD TO STUDY THE GAS-SOLID BURNER FLOW

TEST AND STUDY ON DEVELOPING COMPOSITE BURNERS WITH CAPABILITY OF STABLE COMBUSTION UNDER LOW LOAD AND SLAGGING PREVENTION UNDER HIGH LOAD

Experimental Research Of Controllable Pulverized Coal Rich/Lean Swirl Combustion Technology

Simulation Study on Composite Structure of Impact Type Fuel Rich-lean Burner and Elbows