Abstract:Because methanol can be synthesized from captured CO2 and green H2, it is a promising alternative fuel for reducing carbon emissions from heavy-duty vehicles. Experiments were conducted on a multi-cylinder port fuel injection spark-ignition (SI) heavy-duty pure methanol engine modified from a natural gas engine. The main objective was to evaluate the performance of a heavy-duty SI pure methanol engine and its improvement over the original natural gas engine. The effects of the exhaust gas recirculation (EGR) rate and spark timing on the brake thermal efficiency (BTE), as well as the NOx, CO and HC emissions, were investigated under a wide range of operating conditions. The experimental results indicated that the pure methanol engine had a BTE of > 40% BTE in a brake mean effective pressure (BMEP) range of 1.27-2.17 MPa at speeds ranging from 1000 to 1700 rpm and that the peak BTE was ~ 41.4%, which was higher than that of the original natural gas engine by an absolute 3%. The EGR tolerance of methanol engine was high and the coefficient of variation of the indicated mean effective pressure (COVIMEP) could be maintained below 2%, even at 31% EGR. With an increase in the EGR rate, the CO emissions first decreased and then increased. The partial oxidation of unburned methanol contributed to higher CO emissions when the EGR rate reached a critical value. Advancing the spark timing increased the HC emissions at a low EGR because of the lower post-oxidation temperature; however, it reduced the HC emissions at a high EGR rate because of the more stable combustion. At a BMEP above 0.87 MPa, the NOx, HC and CO emissions ranged from 0.055 to 1.185 g/kWh, from 2.4 to 13.05 g/kWh, and from 6.36 to 10.88 g/kWh, respectively. The pure methanol engine had lower NOx and CO emissions but higher HC emissions than the original natural gas engine.

Experimental Study on Performance and Emissions Characteristics of HCCI Operation for DME/Methanol Dual Fuel

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Combustion and Emission Characteristics of a DI Diesel Engine Fueled by Diesel-Methanol Blends

Experimental study of effects of exhaust gas recirculation and combustion mode on combustion, emission, and performance of DME‐methanol ‐fueled turbocharged c ommon‐rail engine

Experimental Investigation of DME HCCI Engine Emissions

Study on Combustion Characteristics of a Methanol—diesel Dual-Fuel Compression Ignition Engine

Study on HCCI Combustion Fueled with DME

Study on Combustion Characteristics of a DI Diesel Engine Operating on Diesel/Methanol Blends

Study on the Methanol/n-Heptane Duel Fuel Homogeneous Charge Compression Lgnition Combustion

Performance and emission characteristics of QHCCI dimethyl ether engine

Evaluation on the Effects of Compression Ratio, CO2 and LPG on HCCI Combustion Fueled with DME

Combustion and Emission Characteristics of a DI Engine Operating on High Proportion of Methanol-Diesel Dual Fuel

Experimental Evaluation of Performance of Heavy-Duty SI Pure Methanol Engine with EGR

Ignition and combustion inhibition of n-heptane homogenous charge compression ignition (HCCI) combustion by methanol additive

Study of HCCI-DI combustion and emissions in a DME engine

Experimental Study on Operating Region of a Methanol/Diesel Dual Fuel Engine

Comparison of efficiency and emission characteristics in a direct-injection compression ignition engine fuelled with iso-octane and methanol under low temperature combustion conditions

Effects of Compression Ratio and CO2 on the Process of HCCI Combustion Fueled with DME

Combustion and Emission Characteristics of a Homogeneous Charge Compression Ignition Engine

Effect of Pilot Diesel Quantity and Fuel Delivery Advance Angle on the Performance and Emission Characteristics of a Methanol-Fueled Diesel Engine

Investigation on Performance and Emission Characteristics of QHCCI DME Engine