Abstract:The wear condition of the piston/cylinder pair is crucial to the performance and reliabil-ity of the axial piston pump.The hard piston surface,the soft cylinder bore surface,and the inter-face oil film affects each other during the wear process.Specifically,in the mixed lubrication region,the geometry of the hard piston surface asperity directly affects the wear of soft cylinder bore sur-face,while the asperities may deform or even degrade when penetrating and sliding against the cylinder bore.So far,there is no suitable method to simulate their coupled evolution.This paper proposed a wear process simulation model considering the real-time interaction between the elasto-plastic deformation of the piston surface asperity,the wear contour of the cylinder bore,and the lubrication condition of the interface.An offline library of the elasto-plastic constitutive behavior of the asperity based on the finite element method(FEM)is established as a part of the simulation model to precisely analyze the deformation and degradation of the asperity and quickly invoke them in the numerical wear process simulation.The simulation and experimental results show that the piston asperity and the cylinder bore contour converge to a steady state after running-in for about 0.5 h.The distribution of the simulated asperity degradation and wear depth is also verified by the experiment.

Simulation Study on Coupled Heat Transfer for Piston Set-Cylinder Liner

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Simulation Study on Cyclic Transient Heat Transfer of Piston-cylinder Liner

Calculation and Analysis of Piston Thermal Shock by Using Plate Model

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Heat Transfer in Reciprocating Planar Curved Tube with Piston Cooling Application

Development And Simulation Of Lubrication Test System For Port Plate/Cylinder Block In Axial Piston Pump

The Theoretical and Experimental Study of Temperature Change Effect of Cylinder Head Material

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

Research on Cylinder Head Thermal State Simulation

A multi-time scales semi-decoupled CHT (Coupled Heat Transfer) model and its application on piston transient heat transfer simulation

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Simulation of In-Cylinder Radiative Heat Transfer of Diesel Engine with Monte-Carlo Method

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Simulation and Experimental Research on Piston Secondary Motion

Calculation of the Radiation Heat Transfer in Cylinder of Diesel Engine by the Monte-Carlo Method

Three-dimensional Numerical Calculation on Flow and Heat Transfer of Cooling-Water in Engine Cylinder Head Jacket by CFD Software STAR-CD

Coupled Evolution of Piston Asperity and Cylinder Bore Contour of Piston/cylinder Pair in Axial Piston Pump

Experimental investigation on the heat transfer enhancement of wall modification inside a piston cooling gallery

Experimental and simulation study on oscillating flow and heat transfer characteristics of the cooling gallery in steel pistons