Abstract:Lean-burn natural-gas spark-ignition combustion inside a diesel geometry is characterized by two distinct and successive events: a rapid burning process inside the piston bowl, followed by a much slower burn inside the squish region. This paper used experimental data (including images of flame natural luminosity) to investigate the magnitude and phasing of these two combustion stages. The results showed a substantial impact on the parameters generally used to investigate the combustion phenomena in spark-ignition engines (e.g., the 10-to-90-percent energy release). A better solution to identify the start and end of the rapid- and the slow-burning stages in such an engine is to use the inflection points in the apparent rate of heat release. Moreover, as the higher turbulence in a diesel-like environment accelerates flame inception, the 5% or 10% energy release used traditionally to define the flame inception period should not be used for these engines because the enflamed zone already reached an appreciable size at the two corresponding crank angle degrees. Further, the 2nd inflection point in the apparent rate of heat release (i.e., the point where the slow-burning stage started to dominate the heat release) was much advanced compared to 90% energy release generally used to define the end of the rapid-burning stage in conventional stoichiometric spark-ignition engines. Furthermore, as the slow-burning stage was characterized by a lower flame propagation speed, a lower fuel fraction burning during this stage would increase the engine combustion efficiency. Furthermore, a more advanced phasing of the late-burning stage relative to the fast-burn stage would result in a more optimal combustion environment (i.e., higher in-cylinder pressure and temperature), which would further improve the engine efficiency and probably reduce carbon monoxide and unburned hydrocarbon emissions. As a result, this study suggests that the combustion strategy of such converted diesel engines should advance and optimize the mass of fuel that burns inside the squish region.

A Basic Study on the Spark Electrode Gap Position to Natural Gas Direct Injection Super-Lean Combustion

Effect of Spark Timing on the Combustion Stages Seen in a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

A BASIC STUDY ON THE IGNITION POSITION OF NATURAL GAS DIRECT-INJECTION SUPER-LEAN COMBUSTION

Analysis of Two-Stage Natural-Gas Lean Combustion Inside a Diesel Geometry

Methodology to Separate the Two Burn Stages of Natural-Gas Lean Premixed-Combustion Inside a Diesel Geometry

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

The Synergy Effect of Ignition Energy and Spark Plug Gap on Methane Lean Combustion with Addressing Initial Flame Formation and Cyclic Variation

Analysis of Combustion Efficiency in Direct Injection Natural Gas Engine

A Basic Behavior of Cng Di Combustion in A Spark-Ignited Rapid Compression Machine

Impact of Spark Plug Gap on Flame Kernel Propagation and Engine Performance

Influence of Fuel Injection Timing on Combustion and Emission in Direct Injection Natural Gas Engine

Feasibility of CNG DI Stratified Combustion Using a Spark-Ignited Rapid Compression Machine

Experimental Study on the Effects of the Ignition Parameters on the Spark Characteristics and the Flame Propagation of Premixed Methane–air Mixtures

Influences of the Control Parameters and Spark Plug Configurations on the Performance of a Natural Gas Spark-Ignition Engine

Fundamental Study on Combustion Improvement by Mixture-Flow in Natural Gas-Fueled Lean-Burn SI Engines

Numerical study of spark plug electrode gap influence of in-cylinder ethanol flame propagation

Emission Characteristics of Direct Injection Natural Gas Engine Using Rapid Compression Machine

Experimental Research of High-Pressure Methane Pulse Jet and Premixed Ignition Combustion Performance of a Direct Injection Injector

Effect of the Compression Ratio on the Performance and Combustion of A Natural-Gas Direct-Injection Engine

Experimental Investigation the Effects of Spark Discharge Characteristics on the Heavy-Duty Spark Ignition Natural Gas Engine at Low Load Condition